{"title":"Flomatic","description":"","products":[{"product_id":"flomatic-5118e-1-4-80e-enviro-check-r-unleaded-bronze-valve","title":"Flomatic 5118E 1\/4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 5118E 1\/4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 200 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  200 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.2 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  10\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45701175181475,"sku":"5118E","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-5159e-3-8-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 5159E 3\/8\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 5159E 3\/8\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 200 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  200 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  3\/8\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.2 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  10\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702225625251,"sku":"5159E","price":67.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4029e-1-2-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4029E 1\/2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4029E 1\/2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\/2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.4 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  100\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702233227427,"sku":"4029E","price":42.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4030e-3-4-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4030E 3\/4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4030E 3\/4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  3\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.6 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  100\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702426886307,"sku":"4030E","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4031e-1-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4031E 1\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4031E 1\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.3 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702428557475,"sku":"4031E","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4032e-1-1-4-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4032E 1-1\/4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4032E 1-1\/4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.6 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  36\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702429540515,"sku":"4032E","price":66.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4033e-1-1-2-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4033E 1-1\/2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4033E 1-1\/2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  2.6 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  25\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702430621859,"sku":"4033E","price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4034e-2-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4034E 2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4034E 2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  3.5 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  16\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702432653475,"sku":"4034E","price":148.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4035e-2-1-2-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4035E 2-1\/2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4035E 2-1\/2\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C). \u003cmeta charset=\"utf-8\"\u003e2 ½\" and larger are recommended for vertical applications. See 80EVFD or 80DI-VFD for horizontal applications.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  2-1\/2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  6.5 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702434390179,"sku":"4035E","price":557.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4036e-3-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4036E 3\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4036E 3\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C). \u003cmeta charset=\"utf-8\"\u003e2 ½\" and larger are recommended for vertical applications. See 80EVFD or 80DI-VFD for horizontal applications.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  3\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  13 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702437372067,"sku":"4036E","price":673.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4037e-4-80e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4037E 4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4037E 4\" 80E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C). \u003cmeta charset=\"utf-8\"\u003e2 ½\" and larger are recommended for vertical applications. See 80EVFD or 80DI-VFD for horizontal applications.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80E - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. This valve features a non-spin acetal (½\" - 2\") or unleaded bronze (2 ½\"- 4\") poppet with a NITRILE (Buna-N) seal and a stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  24 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702440222883,"sku":"4037E","price":1213.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80EFlomatic.jpg?v=1742406892"},{"product_id":"flomatic-4201e-1-100e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4201E 1\" 100E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4201E 1\" 100E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e100E - ENVIRO CHECK\u003csup\u003e®\u003c\/sup\u003e body casting unleaded bronze. Hex shaped on body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.3 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702485475491,"sku":"4201E","price":48.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100EFlomatic.jpg?v=1742434704"},{"product_id":"flomatic-4202e-1-1-4-100e-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4202E 1-1\/4\" 100E - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4202E 1-1\/4\" 100E - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e100E - ENVIRO CHECK\u003csup\u003e®\u003c\/sup\u003e body casting unleaded bronze. Hex shaped on body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.8 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  36\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45702491898019,"sku":"4202E","price":66.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100EFlomatic.jpg?v=1742434704"},{"product_id":"flomatic-4030hte-3-4-80hte-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4030HTE 3\/4\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4030HTE 3\/4\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  3\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.8 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703418609827,"sku":"4030HTE","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4031hte-1-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4031HTE 1\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4031HTE 1\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.3 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703429095587,"sku":"4031HTE","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4032hte-1-1-4-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4032HTE 1-1\/4\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4032HTE 1-1\/4\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.7 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703599030435,"sku":"4032HTE","price":122.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4033hte-1-1-2-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4033HTE 1-1\/2\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4033HTE 1-1\/2\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  2.6 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703601258659,"sku":"4033HTE","price":149.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4034hte-2-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4034HTE 2\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4034HTE 2\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  3.8 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703603323043,"sku":"4034HTE","price":219.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4035hte-2-1-2-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4035HTE 2-1\/2\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4035HTE 2-1\/2\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  2-1\/2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  6.5 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703605846179,"sku":"4035HTE","price":677.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4036hte-3-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4036HTE 3\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4036HTE 3\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  3\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  13 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703614759075,"sku":"4036HTE","price":802.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4037hte-4-80hte-enviro-check-r-unleaded-bronze-check-valve-high-temp","title":"Flomatic 4037HTE 4\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve (High Temp)","description":"\u003cp\u003eThe Flomatic 4037HTE 4\" 80HTE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 100 psi* and temperatures up to 400°F (200°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80HTE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded female connections. Features a high temperature stainless steel poppet and a VITON seal with a stainless steel spring. Ideal for hot water applications.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e*NOTE:\u003c\/strong\u003e At high temps the pressure rating is derated to 100 psi, the valve will take higher pressure at lower temps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  100 psi*\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  25 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80HTE series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703619084451,"sku":"4037HTE","price":1461.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/HTEFlomatic.jpg?v=1742471046"},{"product_id":"flomatic-4221le-1-1-4-m-x-1-f-100me-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4221LE 1-1\/4\" M x 1\" F 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4221LE 1-1\/4\" Male x 1\" Female 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e100ME - ENVIRO CHECK\u003csup\u003e®\u003c\/sup\u003e body casting unleaded bronze with threaded male x female connection. Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" MNPT x 1\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.3 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703635533987,"sku":"4221LE","price":50.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEFlomatic.jpg?v=1742481348"},{"product_id":"flomatic-4242e-1-1-4-m-x-1-1-4-f-100me-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4242E 1-1\/4\" M x 1-1\/4\" F 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4242E 1-1\/4\" Male x 1-1\/4\" Female 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e100ME - ENVIRO CHECK\u003csup\u003e®\u003c\/sup\u003e body casting unleaded bronze with threaded male x female connection. Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" MNPT x 1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.2 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703641235619,"sku":"4242E","price":61.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEFlomatic.jpg?v=1742481348"},{"product_id":"flomatic-4223e-1-1-2-m-x-1-1-4-f-100me-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4223E 1-1\/2\" M x 1-1\/4\" F 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4223E 1-1\/2\" Male x 1-1\/4\" Female 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e100ME - ENVIRO CHECK\u003csup\u003e®\u003c\/sup\u003e body casting unleaded bronze with threaded male x female connection. Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/2\" MNPT x 1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.8 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  36\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703647690915,"sku":"4223E","price":84.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEFlomatic.jpg?v=1742481348"},{"product_id":"flomatic-4079e-2-m-x-2-f-100me-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4079E 2\" M x 2\" F 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4079E 2\" Male x 2\" Female 100ME - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e100ME - ENVIRO CHECK\u003csup\u003e®\u003c\/sup\u003e body casting unleaded bronze with threaded male x female connection. Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  2\" MNPT x 2\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  2.6 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  16\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703681179811,"sku":"4079E","price":147.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEFlomatic.jpg?v=1742481348"},{"product_id":"flomatic-4071evfd-1-m-x-1-f-100mevfd-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4071EVFD 1\" M x 1\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4071EVFD 1\" M x 1\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e100MEVFD - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded male x female connection. The valve features a high strength patented guide, poppet and spring with a NITRILE (Buna-N) seal.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\" MNPT x 1\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.3 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: \u003cmeta charset=\"utf-8\"\u003eFlomatic Model 80E-VFD \u0026amp; 100E-VFD series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cmeta charset=\"utf-8\"\u003eThe Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eEngineered to perform from the inside-out, Flomatic’s patented Variable Flow Demand (VFD) check valves are uniquely manufactured for long service life and consistent operation across a very wide range of flow rates to meet the high demand of VFD systems. Flomatic’s VFD check valves feature high-strength internals including a poppet guide, bushing, and a radius valve seal.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eVFD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperates efficiently under low flow conditions\u003c\/li\u003e\n\u003cli\u003eSmooth and steady operation\u003c\/li\u003e\n\u003cli\u003eExtends the service life of a pumping system\u003c\/li\u003e\n\u003cli\u003eCan be installed vertically or horizontally\u003c\/li\u003e\n\u003cli\u003eCan be used in VFD \u0026amp; non-VFD systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic has 85 years’ experience designing and manufacturing valve products. The new Model 80EVFD \u0026amp; 100EVFD, like the Model 80DI\/SS VFD, are designed to minimize flow loss and hydraulic shocks in the pumping system. The standard unleaded bronze body or optional Stainless Steel or epoxy coated (NSF approved powder) ductile iron body are designed to support submersible pumps set deep in a well-water casing. Its unique hydraulic custom molded Buna-N rubber sealing surfaces are supported by a mechanical back-up support to maximize the check valve service life. The patented spring loaded poppet system is guided in a generous seat bore. The unique patented poppet system (all Stainless Steel in larger sizes and optional in the smaller sizes) insures that the valve is noiseless during operation and automatically closes tight after each pump cycle. The tapered seat allows a self-cleaning “one point swiping action” by the radius-edged rubber seal during each valve closing cycle. All internal parts are made from corrosion resistant material.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703773716643,"sku":"4071EVFD","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEVFD.jpg?v=1742482824"},{"product_id":"flomatic-4221evfd-1-1-4-m-x-1-f-100mevfd-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4221EVFD 1-1\/4\" M x 1\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4221EVFD 1-1\/4\" M x 1\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e100MEVFD - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded male x female connection. The valve features a high strength patented guide, poppet and spring with a NITRILE (Buna-N) seal.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" MNPT x 1\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.4 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: \u003cmeta charset=\"utf-8\"\u003eFlomatic Model 80E-VFD \u0026amp; 100E-VFD series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cmeta charset=\"utf-8\"\u003eThe Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eEngineered to perform from the inside-out, Flomatic’s patented Variable Flow Demand (VFD) check valves are uniquely manufactured for long service life and consistent operation across a very wide range of flow rates to meet the high demand of VFD systems. Flomatic’s VFD check valves feature high-strength internals including a poppet guide, bushing, and a radius valve seal.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eVFD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperates efficiently under low flow conditions\u003c\/li\u003e\n\u003cli\u003eSmooth and steady operation\u003c\/li\u003e\n\u003cli\u003eExtends the service life of a pumping system\u003c\/li\u003e\n\u003cli\u003eCan be installed vertically or horizontally\u003c\/li\u003e\n\u003cli\u003eCan be used in VFD \u0026amp; non-VFD systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic has 85 years’ experience designing and manufacturing valve products. The new Model 80EVFD \u0026amp; 100EVFD, like the Model 80DI\/SS VFD, are designed to minimize flow loss and hydraulic shocks in the pumping system. The standard unleaded bronze body or optional Stainless Steel or epoxy coated (NSF approved powder) ductile iron body are designed to support submersible pumps set deep in a well-water casing. Its unique hydraulic custom molded Buna-N rubber sealing surfaces are supported by a mechanical back-up support to maximize the check valve service life. The patented spring loaded poppet system is guided in a generous seat bore. The unique patented poppet system (all Stainless Steel in larger sizes and optional in the smaller sizes) insures that the valve is noiseless during operation and automatically closes tight after each pump cycle. The tapered seat allows a self-cleaning “one point swiping action” by the radius-edged rubber seal during each valve closing cycle. All internal parts are made from corrosion resistant material.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45703788626083,"sku":"4221EVFD","price":59.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEVFD.jpg?v=1742482824"},{"product_id":"flomatic-4242evfd-1-1-4-m-x-1-1-4-f-100mevfd-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4242EVFD 1-1\/4\" M x 1-1\/4\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4242EVFD 1-1\/4\" M x 1-1\/4\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e100MEVFD - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded male x female connection. The valve features a high strength patented guide, poppet and spring with a NITRILE (Buna-N) seal.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" MNPT x 1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.7 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: \u003cmeta charset=\"utf-8\"\u003eFlomatic Model 80E-VFD \u0026amp; 100E-VFD series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cmeta charset=\"utf-8\"\u003eThe Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eEngineered to perform from the inside-out, Flomatic’s patented Variable Flow Demand (VFD) check valves are uniquely manufactured for long service life and consistent operation across a very wide range of flow rates to meet the high demand of VFD systems. Flomatic’s VFD check valves feature high-strength internals including a poppet guide, bushing, and a radius valve seal.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eVFD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperates efficiently under low flow conditions\u003c\/li\u003e\n\u003cli\u003eSmooth and steady operation\u003c\/li\u003e\n\u003cli\u003eExtends the service life of a pumping system\u003c\/li\u003e\n\u003cli\u003eCan be installed vertically or horizontally\u003c\/li\u003e\n\u003cli\u003eCan be used in VFD \u0026amp; non-VFD systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic has 85 years’ experience designing and manufacturing valve products. The new Model 80EVFD \u0026amp; 100EVFD, like the Model 80DI\/SS VFD, are designed to minimize flow loss and hydraulic shocks in the pumping system. The standard unleaded bronze body or optional Stainless Steel or epoxy coated (NSF approved powder) ductile iron body are designed to support submersible pumps set deep in a well-water casing. Its unique hydraulic custom molded Buna-N rubber sealing surfaces are supported by a mechanical back-up support to maximize the check valve service life. The patented spring loaded poppet system is guided in a generous seat bore. The unique patented poppet system (all Stainless Steel in larger sizes and optional in the smaller sizes) insures that the valve is noiseless during operation and automatically closes tight after each pump cycle. The tapered seat allows a self-cleaning “one point swiping action” by the radius-edged rubber seal during each valve closing cycle. All internal parts are made from corrosion resistant material.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45704428912803,"sku":"4242EVFD","price":109.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEVFD.jpg?v=1742482824"},{"product_id":"flomatic-4223evfd-1-1-2-m-x-1-1-4-f-100mevfd-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4223EVFD 1-1\/2\" M x 1-1\/4\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4223EVFD 1-1\/2\" M x 1-1\/4\" F 100MEVFD - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C).\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e100MEVFD - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze with threaded male x female connection. The valve features a high strength patented guide, poppet and spring with a NITRILE (Buna-N) seal.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/2\" MNPT x 1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.9 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  36\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: \u003cmeta charset=\"utf-8\"\u003eFlomatic Model 80E-VFD \u0026amp; 100E-VFD series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: \u003cmeta charset=\"utf-8\"\u003eThe Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eEngineered to perform from the inside-out, Flomatic’s patented Variable Flow Demand (VFD) check valves are uniquely manufactured for long service life and consistent operation across a very wide range of flow rates to meet the high demand of VFD systems. Flomatic’s VFD check valves feature high-strength internals including a poppet guide, bushing, and a radius valve seal.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eVFD:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOperates efficiently under low flow conditions\u003c\/li\u003e\n\u003cli\u003eSmooth and steady operation\u003c\/li\u003e\n\u003cli\u003eExtends the service life of a pumping system\u003c\/li\u003e\n\u003cli\u003eCan be installed vertically or horizontally\u003c\/li\u003e\n\u003cli\u003eCan be used in VFD \u0026amp; non-VFD systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic has 85 years’ experience designing and manufacturing valve products. The new Model 80EVFD \u0026amp; 100EVFD, like the Model 80DI\/SS VFD, are designed to minimize flow loss and hydraulic shocks in the pumping system. The standard unleaded bronze body or optional Stainless Steel or epoxy coated (NSF approved powder) ductile iron body are designed to support submersible pumps set deep in a well-water casing. Its unique hydraulic custom molded Buna-N rubber sealing surfaces are supported by a mechanical back-up support to maximize the check valve service life. The patented spring loaded poppet system is guided in a generous seat bore. The unique patented poppet system (all Stainless Steel in larger sizes and optional in the smaller sizes) insures that the valve is noiseless during operation and automatically closes tight after each pump cycle. The tapered seat allows a self-cleaning “one point swiping action” by the radius-edged rubber seal during each valve closing cycle. All internal parts are made from corrosion resistant material.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45704432484515,"sku":"4223EVFD","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100MEVFD.jpg?v=1742482824"},{"product_id":"flomatic-4501px-70-auto-drain-pvc-5-psi","title":"Flomatic 4501PX 70 Auto-Drain (PVC, 5 PSI)","description":"\u003cp\u003eThe Flomatic 4501PX 70 Auto-Drain is made of PVC and opens at 5 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e70 - Auto-Drain - This 1\" valve is available in stainless steel and PVC. All internal parts are engineered composite with a stainless steel disc and resilient seat.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eSpring Range:  5 psi\u003c\/p\u003e\n\u003cp\u003eMaterial:  PVC (Grey)\u003c\/p\u003e\n\u003cp\u003eConnection:  1\" Male NPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.1 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  12\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Model 70 Automatic Drain Valve automatically opens to atmosphere when water system pressure drops below 5 or 10 (psi). The spring-loaded drain valve operates hydraulically and is designed to close thru the water flow velocity in the pipe. The drain valve will provide automatic drainage of pipe water lines in a water system when the line pressure drops below 5 or 10 psi. No adjustments are necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Automatic Drain Valve is normally held open by the force of the compression spring. The Flomatic Valves Auto-Drain Valve Model 70 when properly installed in a water wells riser pipe will drain the piping system when the system pressure is 5 or 10 psi or lower.\u003c\/p\u003e\n\u003cp\u003eNOTE: The Auto-Drain Valve will close automatically when the water flow velocity reaches about 5 GPM or greater in a 1” size pipe.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFlomatic's Model 70 Auto Drain Valves protect domestic water well systems and irrigation systems from freezing throughout winter. This simple yet effective 1 inch valve streamlines the winterization process.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to Automatically Drain Water in:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic well water systems\u003c\/li\u003e\n\u003cli\u003eIrrigation and agricultural sprinkler systems\u003c\/li\u003e\n\u003cli\u003eDewatering systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eValve Operation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically drains water lines when the line pressure drops below\u003cbr\u003e5 or 10 PSI in a closed water system (depending on chosen configuration).\u003c\/li\u003e\n\u003cli\u003eVersatile installation: vertical or horizontal mounting position\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydraulically operated\u003c\/li\u003e\n\u003cli\u003eCorrosive resistant material: available in stainless steel and PVC\u003c\/li\u003e\n\u003cli\u003eMaintenance free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Auto Drain Valve should always be installed in an area that would not result in water damage. We recommend installing the valve in a 1\" NPT pipe tee fitting. The pipe tee should be located in a 1\" or 1 ¼ \" water well drop pipe between the submersible pump and ground level. The pipe tee's location should be a maximum vertical distance of 10 feet for 5 PSI (or 20 feet for 10 PSI valve) from the closest drain faucet in the water system. No check valve can be installed between the auto drain valve and drain faucet as it would prevent water system drain back.\u003c\/p\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45704435925155,"sku":"4501PX","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/4501PVC.jpg?v=1742495999"},{"product_id":"flomatic-4501ssx-70-auto-drain-stainless-steel-5-psi","title":"Flomatic 4501SSX 70 Auto-Drain (Stainless Steel, 5 PSI)","description":"\u003cp\u003eThe Flomatic 4501SSX 70 Auto-Drain is made of Stainless Steel and opens at 5 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e70 - Auto-Drain - This 1\" valve is available in stainless steel and PVC. All internal parts are engineered composite with a stainless steel disc and resilient seat.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eSpring Range:  5 psi\u003c\/p\u003e\n\u003cp\u003eMaterial:  Stainless Steel\u003c\/p\u003e\n\u003cp\u003eConnection:  1\" Male NPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.3 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  12\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Model 70 Automatic Drain Valve automatically opens to atmosphere when water system pressure drops below 5 or 10 (psi). The spring-loaded drain valve operates hydraulically and is designed to close thru the water flow velocity in the pipe. The drain valve will provide automatic drainage of pipe water lines in a water system when the line pressure drops below 5 or 10 psi. No adjustments are necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Automatic Drain Valve is normally held open by the force of the compression spring. The Flomatic Valves Auto-Drain Valve Model 70 when properly installed in a water wells riser pipe will drain the piping system when the system pressure is 5 or 10 psi or lower.\u003c\/p\u003e\n\u003cp\u003eNOTE: The Auto-Drain Valve will close automatically when the water flow velocity reaches about 5 GPM or greater in a 1” size pipe.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFlomatic's Model 70 Auto Drain Valves protect domestic water well systems and irrigation systems from freezing throughout winter. This simple yet effective 1 inch valve streamlines the winterization process.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to Automatically Drain Water in:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic well water systems\u003c\/li\u003e\n\u003cli\u003eIrrigation and agricultural sprinkler systems\u003c\/li\u003e\n\u003cli\u003eDewatering systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eValve Operation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically drains water lines when the line pressure drops below\u003cbr\u003e5 or 10 PSI in a closed water system (depending on chosen configuration).\u003c\/li\u003e\n\u003cli\u003eVersatile installation: vertical or horizontal mounting position\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydraulically operated\u003c\/li\u003e\n\u003cli\u003eCorrosive resistant material: available in stainless steel and PVC\u003c\/li\u003e\n\u003cli\u003eMaintenance free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Auto Drain Valve should always be installed in an area that would not result in water damage. We recommend installing the valve in a 1\" NPT pipe tee fitting. The pipe tee should be located in a 1\" or 1 ¼ \" water well drop pipe between the submersible pump and ground level. The pipe tee's location should be a maximum vertical distance of 10 feet for 5 PSI (or 20 feet for 10 PSI valve) from the closest drain faucet in the water system. No check valve can be installed between the auto drain valve and drain faucet as it would prevent water system drain back.\u003c\/p\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45705613607075,"sku":"4501SSX","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/4501SS.jpg?v=1742523592"},{"product_id":"flomatic-4501ss-70-auto-drain-stainless-steel-10-psi","title":"Flomatic 4501SS 70 Auto-Drain (Stainless Steel, 10 PSI)","description":"\u003cp\u003eThe Flomatic 4501SS 70 Auto-Drain is made of Stainless Steel and opens at 10 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e70 - Auto-Drain - This 1\" valve is available in stainless steel and PVC. All internal parts are engineered composite with a stainless steel disc and resilient seat.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eNote:\u003c\/strong\u003e 10 PSI Spring Requires Minimum 5 GPM To Close. For Lower Flows or Long Horizontal Runs Use Standard 5 PSI.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eSpring Range:  10 psi\u003c\/p\u003e\n\u003cp\u003eMaterial:  Stainless Steel\u003c\/p\u003e\n\u003cp\u003eConnection:  1\" Male NPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.3 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  12\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Model 70 Automatic Drain Valve automatically opens to atmosphere when water system pressure drops below 5 or 10 (psi). The spring-loaded drain valve operates hydraulically and is designed to close thru the water flow velocity in the pipe. The drain valve will provide automatic drainage of pipe water lines in a water system when the line pressure drops below 5 or 10 psi. No adjustments are necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Automatic Drain Valve is normally held open by the force of the compression spring. The Flomatic Valves Auto-Drain Valve Model 70 when properly installed in a water wells riser pipe will drain the piping system when the system pressure is 5 or 10 psi or lower.\u003c\/p\u003e\n\u003cp\u003eNOTE: The Auto-Drain Valve will close automatically when the water flow velocity reaches about 5 GPM or greater in a 1” size pipe.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFlomatic's Model 70 Auto Drain Valves protect domestic water well systems and irrigation systems from freezing throughout winter. This simple yet effective 1 inch valve streamlines the winterization process.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to Automatically Drain Water in:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic well water systems\u003c\/li\u003e\n\u003cli\u003eIrrigation and agricultural sprinkler systems\u003c\/li\u003e\n\u003cli\u003eDewatering systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eValve Operation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically drains water lines when the line pressure drops below\u003cbr\u003e5 or 10 PSI in a closed water system (depending on chosen configuration).\u003c\/li\u003e\n\u003cli\u003eVersatile installation: vertical or horizontal mounting position\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydraulically operated\u003c\/li\u003e\n\u003cli\u003eCorrosive resistant material: available in stainless steel and PVC\u003c\/li\u003e\n\u003cli\u003eMaintenance free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Auto Drain Valve should always be installed in an area that would not result in water damage. We recommend installing the valve in a 1\" NPT pipe tee fitting. The pipe tee should be located in a 1\" or 1 ¼ \" water well drop pipe between the submersible pump and ground level. The pipe tee's location should be a maximum vertical distance of 10 feet for 5 PSI (or 20 feet for 10 PSI valve) from the closest drain faucet in the water system. No check valve can be installed between the auto drain valve and drain faucet as it would prevent water system drain back.\u003c\/p\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45705621700771,"sku":"4501SS","price":43.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/4501SS.jpg?v=1742523592"},{"product_id":"flomatic-4501p-70-auto-drain-pvc-10-psi","title":"Flomatic 4501P 70 Auto-Drain (PVC, 10 PSI)","description":"\u003cp\u003eThe Flomatic 4501P 70 Auto-Drain is made of PVC and opens at 10 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e70 - Auto-Drain - This 1\" valve is available in stainless steel and PVC. All internal parts are engineered composite with a stainless steel disc and resilient seat.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e 10 PSI Spring Requires Minimum 5 GPM To Close. For Lower Flows or Long Horizontal Runs Use Standard 5 PSI.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eSpring Range:  10 psi\u003c\/p\u003e\n\u003cp\u003eMaterial:  PVC (Grey)\u003c\/p\u003e\n\u003cp\u003eConnection:  1\" Male NPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.1 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  12\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003eThe Model 70 Automatic Drain Valve automatically opens to atmosphere when water system pressure drops below 5 or 10 (psi). The spring-loaded drain valve operates hydraulically and is designed to close thru the water flow velocity in the pipe. The drain valve will provide automatic drainage of pipe water lines in a water system when the line pressure drops below 5 or 10 psi. No adjustments are necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOperation: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Automatic Drain Valve is normally held open by the force of the compression spring. The Flomatic Valves Auto-Drain Valve Model 70 when properly installed in a water wells riser pipe will drain the piping system when the system pressure is 5 or 10 psi or lower.\u003c\/p\u003e\n\u003cp\u003eNOTE: The Auto-Drain Valve will close automatically when the water flow velocity reaches about 5 GPM or greater in a 1” size pipe.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFlomatic's Model 70 Auto Drain Valves protect domestic water well systems and irrigation systems from freezing throughout winter. This simple yet effective 1 inch valve streamlines the winterization process.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned to Automatically Drain Water in:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDomestic well water systems\u003c\/li\u003e\n\u003cli\u003eIrrigation and agricultural sprinkler systems\u003c\/li\u003e\n\u003cli\u003eDewatering systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eValve Operation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatically drains water lines when the line pressure drops below\u003cbr\u003e5 or 10 PSI in a closed water system (depending on chosen configuration).\u003c\/li\u003e\n\u003cli\u003eVersatile installation: vertical or horizontal mounting position\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydraulically operated\u003c\/li\u003e\n\u003cli\u003eCorrosive resistant material: available in stainless steel and PVC\u003c\/li\u003e\n\u003cli\u003eMaintenance free\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Model 70 Auto Drain Valve should always be installed in an area that would not result in water damage. We recommend installing the valve in a 1\" NPT pipe tee fitting. The pipe tee should be located in a 1\" or 1 ¼ \" water well drop pipe between the submersible pump and ground level. The pipe tee's location should be a maximum vertical distance of 10 feet for 5 PSI (or 20 feet for 10 PSI valve) from the closest drain faucet in the water system. No check valve can be installed between the auto drain valve and drain faucet as it would prevent water system drain back.\u003c\/p\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45705623896227,"sku":"4501P","price":38.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/4501PVC.jpg?v=1742495999"},{"product_id":"flomatic-4231e-1-f-x-1-1-4-m-100dpe-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4231E 1\" F x 1-1\/4\" M 100DPE - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4231E 1\" Female x 1-1\/4\" Male 100DPE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C). Each end of the check valve has 1\" Female and 1-1\/4\" Male NPT threads.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e100DPE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze, dual purpose check valve, stainless steel spring and non-spin acetal poppet. 1¼\" male and 1\" female threads on both ends with a Nitrile (Buna-N) seal.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1\" FNPT x 1-1\/4\" MNPT on Both Ends\u003c\/p\u003e\n\u003cp\u003eWeight:  1.2 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  50\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45705632874659,"sku":"4231E","price":64.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100DPE.jpg?v=1742524136"},{"product_id":"flomatic-4242xle-1-1-4-m-x-1-1-4-f-100xle-enviro-check-r-unleaded-bronze-check-valve","title":"Flomatic 4242XLE 1-1\/4\" M x 1-1\/4\" F 100XLE - ENVIRO CHECK® Unleaded Bronze Check Valve","description":"\u003cp\u003eThe Flomatic 4242XLE 1-1\/4\" Male x 1-1\/4\" Female 100XLE - ENVIRO CHECK® Unleaded Bronze Check Valve can handle pressures to 400 psi and temperatures up to \u003cmeta charset=\"utf-8\"\u003e180°F (80°C). \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e100XLE - ENVIRO CHECK\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e body casting unleaded bronze. Hex shaped body for easy wrenching, this valve features a non-spin acetal poppet with a NITRILE (Buna-N) seal and stainless steel spring. Features extra long threads for bell end special PVC drop pipe.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 and 372 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Unleaded Bronze\u003c\/p\u003e\n\u003cp\u003eInlet \/ Outlet:  1-1\/4\" MNPT x 1-1\/4\" FNPT\u003c\/p\u003e\n\u003cp\u003eWeight:  1.7 lbs\u003c\/p\u003e\n\u003cp\u003eCase Qty:  36\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOperation: Flomatic Model 80E \u0026amp; 100E series Enviro Check® valves are designed to provide years of trouble free operation without maintenance when properly sized and installed in an appropriately selected pumping application, in regards to flow and maximum system pressures.\u003c\/p\u003e\n\u003cp\u003eConstruction: The Flomatic check valve body is constructed to handle the rated system flow and pressures as stated, and to support the combined weight of the submersible pump, pipe, and the water in the riser pipe. In addition, the valves are uniquely designed to mitigate some of the hydraulic water shocks associated with well water pumping when the following check valve installation instructions are adhered to.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eProud to manufacture high quality valves built to last since 1933, Flomatic® Valves is a dedicated American made valve manufacturer certified under ISO 9001 and ISO 14001 quality and environmental management systems. Our NSF\/ANSI 61 certified unleaded Enviro Check® was one of the first unleaded check valve to reduce lead content and protect water from lead contamination while providing uninterrupted flow efficient performance. With a variety of poppet designs available to meet and perform in a wide range of applications, Flomatic’s valves are among the most reliable check valves manufactured for submersible pump applications on the market today. Our Enviro Check® valves are cast from unleaded alloy and available with multiple connection types ranging in sizes ¼ through 4 inch and backed by a 5-year warranty.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNSF\/ANSI 61 approved\u003c\/li\u003e\n\u003cli\u003eLow head loss\u003c\/li\u003e\n\u003cli\u003eReduces hydraulic shock\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant internals\u003c\/li\u003e\n\u003cli\u003eCustom-molded Nitrile (Buna-N) seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWell water pump systems\u003c\/li\u003e\n\u003cli\u003eWater applications\u003c\/li\u003e\n\u003cli\u003eIrrigation systems\u003c\/li\u003e\n\u003cli\u003eSprinkler systems\u003c\/li\u003e\n\u003cli\u003eGasoline\/Oil applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45705638117539,"sku":"4242XLE","price":91.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/100XLE.jpg?v=1742524415"},{"product_id":"flomatic-4801ss-48-drain-back-plug","title":"Flomatic 4801SS 48 Drain-Back Plug","description":"\u003cp\u003eThe Flomatic 4801SS 48 Drain-Back Plug is made of all stainless steel construction for maximum longevity and easy field replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eModel 48 Drain Back - 1\" Drain-Back valve in an all stainless steel construction. Threads to install into a 1\" pipe tee. The reusable spring loaded valve is activated when a weight is dropped, draining the riser pipe automatically. Patented.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  400 psi\u003c\/p\u003e\n\u003cp\u003eMaterial:  Stainless Steel\u003c\/p\u003e\n\u003cp\u003eConnection:  1\" Male NPT\u003c\/p\u003e\n\u003cp\u003eWeight:  0.3 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 48 is a Drain-Back-Plug for Submersible Pump Water Well Installations. The Flomatic reusable Drain-Back valve Model 48 is designed to automatically drain the riser pipe when activated. Designed in an all stainless steel construction, the spring loaded valve, threads to install into a 1\" pipe tee and it is activated when a weight is dropped into the well drop. By utilizing this drain back Model 48 valve the pulling of pipe and pump becomes much easier and safer.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEliminates water splashing at well head\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrevents potential cross-contamination of the water well\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReduces Pulling weight by 20-50%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatically drains water in riser pipe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReusable and Resets Automatically After Use\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy Field Replaceable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResilient Seating, Standard Flomatic Buna-N\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUn-Leaded Body, NSF 372 Certified\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistant Stainless Steel Construction\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e400 PSI Pressure Rating\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45705644474531,"sku":"4801SS","price":67.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/4801SS.jpg?v=1742524995"},{"product_id":"flomatic-7937mdw8euplg-2-3-8-80mdw-vfd-deep-well-r-check-valve","title":"Flomatic 7937MDW8EUPLG 2-3\/8\" 80MDW-VFD DEEP WELL® EU Threads Check Valve","description":"\u003cp\u003eThe Flomatic 7937MDW8EUPLG 2-3\/8\" 80MDW-VFD DEEP WELL® EU Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e80MDW-VFD DEEP WELL\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e8 Round EU (External-Upset) Tubing - High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring \/stem with external upset tubing round threads, EU-API 5B Table 7. Standard with break-off plug\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads:  2-3\/8\" EU\u003c\/p\u003e\n\u003cp\u003eWeight:  7.8 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45709884883107,"sku":"7937MDW8EUPLG","price":941.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/7937MDW8EUPLG.jpg?v=1742602768"},{"product_id":"flomatic-7936mdw8euplg-2-7-8-80mdw-vfd-deep-well-r-check-valve","title":"Flomatic 7936MDW8EUPLG 2-7\/8\" 80MDW-VFD DEEP WELL® EU Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e7936MDW8EUPLG\u003c\/span\u003e 2-7\/8\" 80MDW-VFD DEEP WELL® EU Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e80MDW-VFD DEEP WELL\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e8 Round EU (External-Upset) Tubing - High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring \/stem with external upset tubing round threads, EU-API 5B Table 7. Standard with break-off plug\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads:  2-7\/8\" EU\u003c\/p\u003e\n\u003cp\u003eWeight:  13 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45711730409635,"sku":"7936MDW8EUPLG","price":1110.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/7937MDW8EUPLG.jpg?v=1742602768"},{"product_id":"flomatic-7938mdw8euplg-3-1-2-80mdw-vfd-deep-well-r-check-valve","title":"Flomatic 7938MDW8EUPLG 3-1\/2\" 80MDW-VFD DEEP WELL® EU Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e7938MDW8EUPLG\u003c\/span\u003e 3-1\/2\" 80MDW-VFD DEEP WELL® EU Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e80MDW-VFD DEEP WELL\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e8 Round EU (External-Upset) Tubing - High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring \/stem with external upset tubing round threads, EU-API 5B Table 7. Standard with break-off plug\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads:  3-1\/2\" EU\u003c\/p\u003e\n\u003cp\u003eWeight:  20 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45711787917475,"sku":"7938MDW8EUPLG","price":1281.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/7937MDW8EUPLG.jpg?v=1742602768"},{"product_id":"flomatic-7939mdw8euplg-4-1-2-80mdw-vfd-deep-well-r-check-valve","title":"Flomatic 7939MDW8EUPLG 4-1\/2\" 80MDW-VFD DEEP WELL® EU Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e7939MDW8EUPLG\u003c\/span\u003e 4-1\/2\" 80MDW-VFD DEEP WELL® EU Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e80MDW-VFD DEEP WELL\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e \u003c\/span\u003e8 Round EU (External-Upset) Tubing - High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring \/stem with external upset tubing round threads, EU-API 5B Table 7. Standard with break-off plug\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads:  4-1\/2\" EU\u003c\/p\u003e\n\u003cp\u003eWeight:  37 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45711788376227,"sku":"7939MDW8EUPLG","price":1936.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/7937MDW8EUPLG.jpg?v=1742602768"},{"product_id":"flomatic-79391mdw8slplg-4-1-2-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 79391MDW8SLPLG 4-1\/2\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e79391MDW8SLPLG 4\u003c\/span\u003e-1\/2\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads:  4-1\/2\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  40 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715658703011,"sku":"79391MDW8SLPLG","price":1879.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-79402mdw8slplg-5-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 79402MDW8SLPLG 5\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e79402MDW8SLPLG 5\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 5\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  34 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715682230435,"sku":"79402MDW8SLPLG","price":1936.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-4088mdw8slplg-5-1-2-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 4088MDW8SLPLG 5-1\/2\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4088MDW8SLPLG\u003c\/span\u003e 5-1\/2\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Manufactured with \u003cspan\u003e8 round male end short casing x female end long casing threads. \u003c\/span\u003eDesigned to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 5-1\/2\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  42 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715696189603,"sku":"4088MDW8SLPLG","price":3588.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-4089mdw8slplg-6-5-8-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 4089MDW8SLPLG 6-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4089MDW8SLPLG\u003c\/span\u003e 6-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Manufactured with \u003cspan\u003e8 round male end short casing x female end long casing threads. \u003c\/span\u003eDesigned to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 6-5\/8\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  68 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715710116003,"sku":"4089MDW8SLPLG","price":4442.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-40903mdw8slplg-7-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 40903MDW8SLPLG 7\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e40903MDW8SLPLG 7\u003c\/span\u003e\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 7\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  61 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715717652643,"sku":"40903MDW8SLPLG","price":5980.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-4091mdw8slplg-7-5-8-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 4091MDW8SLPLG 7-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4091MDW8SLPLG\u003c\/span\u003e 7-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Manufactured with \u003cspan\u003e8 round male end short casing x female end long casing threads. \u003c\/span\u003eDesigned to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 7-5\/8\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  90 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715730006179,"sku":"4091MDW8SLPLG","price":7260.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-4092mdw8slplg-8-5-8-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 4092MDW8SLPLG 8-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4092MDW8SLPLG\u003c\/span\u003e 8-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Manufactured with \u003cspan\u003e8 round male end short casing x female end long casing threads. \u003c\/span\u003eDesigned to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 8-5\/8\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  99 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715735675043,"sku":"4092MDW8SLPLG","price":8542.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-4093mdw8slplg-9-5-8-80mdw-vfd-deep-well-r-casing-threads-check-valve","title":"Flomatic 4093MDW8SLPLG 9-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve","description":"\u003cp\u003eThe Flomatic \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e4093MDW8SLPLG\u003c\/span\u003e 9-5\/8\" 80MDW-VFD DEEP WELL® Casing Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Manufactured with \u003cspan\u003e8 round male end short casing x female end long casing threads. \u003c\/span\u003eDesigned to handle pressures to 4400 psi and temperatures up to 200°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80MDW-VFD DEEP WELL\u003c\/span\u003e\u003csup\u003e®\u003c\/sup\u003e\u003cspan\u003e Male short casing x female long casing threads- High strength epoxy coated carbon steel body, male inlet x female outlet. Metal to metal seat with stainless steel spring and stem with casing round threads. Standard with break-off plug.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBody Pressure Max: 4,400 PSI (API J55 Tubing)\u003cbr\u003e\u003cbr\u003e2-3\/8\" thru 3-1\/2\" use a 3\/8\" break-off plug.\u003cbr\u003e4-1\/2\" thru 9-5\/8\" use a 3\/4\" break-off plug.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  4400 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Carbon Steel\u003c\/p\u003e\n\u003cp\u003eThreads: 9-5\/8\" Casing\u003c\/p\u003e\n\u003cp\u003eWeight:  154 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eFlomatic's Model 80MDW-VFD is a high performance, low friction loss, Deep Well Check Valve designed for well water use to support the weight of up to 3,300 feet of pipe and the well pump. The small OD valve body is constructed from very strong Carbon Steel, similar in strength to API J55 tubing. Featuring a male inlet x female outlet body with 8 round EU (External-Upset) Tubing threads 2 3\/8\" thru 4 ½ \", or 8 round make short casing threads x female long casing threads 4 ½ \" thru 9 5\/8\". Additionally, the spring loaded metal to metal valve seat, is uniquely designed to provide low friction losses, prevent backflow, and minimize hydraulic shocks in the system. Model 80MDW-VFD provides years of trouble-free operation.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLower Friction Loss:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to its uniquely designed spring loaded metal to metal valve seat, Model 80MDW-VFD provides lower friction losses, preventing backflow and minimizing hydraulic shocks in the system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact Design:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Valve Body dimension to fit in smaller diameter well casings along with 8 Round or 8 Round short threads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFusion Bonded Epoxy Coated NSF 61 Approved, Inside and Out\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Up to 3,300 feet of Pipe and Pump Weight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStandard 3\/4\" Break-Off Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHydro tested at 4,400 PSI with a 1-Year Warranty\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDifferent sizes available in an all 316 assembly (Consult Factory)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45715741343907,"sku":"4093MDW8SLPLG","price":10250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/79402MDW8SLPLG.jpg?v=1742692031"},{"product_id":"flomatic-7938-1vfd-3-80di8r-vfd-8-round-threads-check-valve","title":"Flomatic 7938-1VFD 3\" 80DI8R-VFD - 8 Round Threads Check Valve","description":"\u003cp\u003eThe Flomatic 7938-1VFD 3\" 80DI8R-VFD - 8 Round Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 600 psi and temperatures up to 180°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80DI8R-VFD 8 Round Line Pipe Threads - \u003c\/span\u003e\u003cspan\u003eHigh strength epoxy coated ductile iron patented body, poppet and guide with 8 round connection. Features a NITRILE (Buna-N) seal, with stainless steel shaft and a ductile iron poppet. Designed for vertical or horizontal applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*\u003cmeta charset=\"utf-8\"\u003e8 round threads are NOT API certified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  600 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Ductile Iron\u003c\/p\u003e\n\u003cp\u003eThreads:  3\"\u003c\/p\u003e\n\u003cp\u003eWeight:  12 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe American Made and one of the first-ever VariableFlow Demands (VFD) Check Valve for the Submersible Pump Industry continues to lead the way as the industry's pioneer.\u003cbr\u003eThe patented 80DIVFD is uniquely engineered to allow the valve to operate in a wide flow range which typically is the case with VFD controlled pumps. The exclusive poppet system ensures that the valve automatically closes tight and noiseless after each pump cycle. A self-cleaning seat\/stem helps increase service life and the optional Break-Off plug improves convenience when servicing the system. Available in Bronze, Stainless Steel, and Ductile Iron 1\" thru 10\", Flomatic's 80DIVFD Series is a clear and reliable choice, another High Quality Valve Built to Last.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow Friction Loss\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoiseless Operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel Guiding\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong Ductile Iron, Enviro, or Stainless Steel Body\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistant Internal Components\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\"Pipe Thread-Lead-In\" Section\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLonger Thread Areas\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional \"Break-Off\" Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFemale by Female, Male by Female, or Male by Male NPT or\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 Round Thread Configurations\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanical Support for the Hydraulic Sea\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45716706099363,"sku":"7938-1VFD","price":913.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80DI8RVFD-8Roundthreads.jpg?v=1742751581"},{"product_id":"flomatic-7939-1vfd-4-80di8r-vfd-8-round-threads-check-valve","title":"Flomatic 7939-1VFD 4\" 80DI8R-VFD - 8 Round Threads Check Valve","description":"\u003cp\u003eThe Flomatic 7939-1VFD 4\" 80DI8R-VFD - 8 Round Threads Check Valve is uniquely designed to prevent backflow, minimize hydraulic shocks and provide low friction losses. Designed to handle pressures to 600 psi and temperatures up to 180°F.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e80DI8R-VFD 8 Round Line Pipe Threads - \u003c\/span\u003e\u003cspan\u003eHigh strength epoxy coated ductile iron patented body, poppet and guide with 8 round connection. Features a NITRILE (Buna-N) seal, with stainless steel shaft and a ductile iron poppet. Designed for vertical or horizontal applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*\u003cmeta charset=\"utf-8\"\u003e8 round threads are NOT API certified.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNSF\/ANSI 61 Approved\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMax Pressure:  600 psi\u003c\/p\u003e\n\u003cp\u003eBody:  Ductile Iron\u003c\/p\u003e\n\u003cp\u003eThreads:  4\"\u003c\/p\u003e\n\u003cp\u003eWeight:  27 lbs\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThe American Made and one of the first-ever VariableFlow Demands (VFD) Check Valve for the Submersible Pump Industry continues to lead the way as the industry's pioneer.\u003cbr\u003eThe patented 80DIVFD is uniquely engineered to allow the valve to operate in a wide flow range which typically is the case with VFD controlled pumps. The exclusive poppet system ensures that the valve automatically closes tight and noiseless after each pump cycle. A self-cleaning seat\/stem helps increase service life and the optional Break-Off plug improves convenience when servicing the system. Available in Bronze, Stainless Steel, and Ductile Iron 1\" thru 10\", Flomatic's 80DIVFD Series is a clear and reliable choice, another High Quality Valve Built to Last.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLow Friction Loss\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNoiseless Operation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStainless Steel Guiding\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStrong Ductile Iron, Enviro, or Stainless Steel Body\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorrosion Resistant Internal Components\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\"Pipe Thread-Lead-In\" Section\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLonger Thread Areas\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional \"Break-Off\" Plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFemale by Female, Male by Female, or Male by Male NPT or\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e8 Round Thread Configurations\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMechanical Support for the Hydraulic Sea\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flomatic","offers":[{"title":"Default Title","offer_id":45717427224739,"sku":"7939-1VFD","price":989.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/files\/80DI8RVFD-8Roundthreads.jpg?v=1742751581"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2058\/5123\/collections\/Flomatic_Logo.jpg?v=1736109257","url":"https:\/\/dadepump.com\/collections\/flomatic.oembed?page=6","provider":"Dade Pump \u0026 Supply","version":"1.0","type":"link"}