Franklin Electric
Franklin Electric 2340543432S - 4" MagForce™ High Efficiency Motor - Water Well Type (5 HP, Three Phase, 230V, 120Hz, 3-Wire)
Franklin Electric 2340543432S - 4" MagForce™ High Efficiency Motor - Water Well Type (5 HP, Three Phase, 230V, 120Hz, 3-Wire)
SKU:2340543432S
Couldn't load pickup availability
The Franklin Electric 2340543432S - 4" MagForce™ High Efficiency Motor - Water Well Type - is powered with permanent magnet technology. Equipped with a 5 HP three phase motor, super stainless steel construction and Kingsbury-type thrust bearing this motor was designed to ensure your water continues to flow. Manufactured by Franklin Electric for quality and reliability when consistent performance is required. Please contact a member of Dade Pump's sales or service team for assistance in selecting the correct pump for your needs!
** Please Note: Image is a stock photo and may not match exactly **
Product Specifications:
HP: 5
Phase: Three
Voltage: 230
Hz: 120
Wire: 3-Wire
Motor Length: 15.4"
Weight: 33 lbs
Lead: Yes - 4'
Manufacturer Description:
Franklin Electric 4-Inch MagForce High Efficiency Motors are the next generation of submersibles powered by permanent magnet technology. Leveraging the unwavering reliability of Franklin Electric's submersible motor design, MagForce High Efficiency Motors offer improved performance over standard induction motors while also providing the features, benefits and robustness you trust for servicing water well applications.
Applications - Ideal for Long Run:
- Groundwater remediation
- Drainage water level control
- Municipal/Utility water supply
- Construction site dewatering
- High volume and industrial livestock operations
- Mine site dewatering and tank level control
- Well supply geothermal HVAC systems
Basic Features:
- High efficiency electrical desgin for low operational costs
- Corrosion-resistant all stainless steel exterior construction
- Stainless steel splined shaft
- Hermetically-sealed windings
- Anti-track self-healing resin system
- Water lubrication
- Filter check valve
- Kingsbury-type thrust bearing
- Pressure equalizing diaphragm
- Built-in lightning arrestors
- Continuous rating in 86° F (30 °C) water
- Removable "Water-Bloc" lead
- UL 778 recognized
- CSA certified
- ANSI/NSF 61 certified
- NEMA mounting dimensions
Ratings |
|
| HP 60Hz | 5 hp |
| HP 50Hz | 5 hp |
| HP 120Hz | 5 hp |
| Frequency | 120 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 13.9 A |
| Amps - Service Factor | 13.9 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 900 lb |
| Lead Length | 4 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Lead Jam Nut |
| Motor Efficiency | 90.0 |
| Motor Insulation Classification | B |
| Poles | 4 |
| S.F. | 1.15 |
| Service Factor - 50Hz | Not Applicable |
Operation |
|
| Motor Cooling | Water |
| Minimum Cooling Flow | .25 ft/sec |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 900 lb |
Materials of Construction |
|
| Thrust Bearing | Kingsbury Type |
| Seal | Lip Seal Ring |
| Lead Insulation Material | XLPE |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Construction Design | Super Stainless |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | Water + Propylene Glycol |
| Motor Top End Bell Material | 304SS Cover painted cast iron |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Fill | Water/Propyleneglycol |
| Stator/ Motor Shell Material | Stainless Steel |
| Winding Material | Copper |
Dimensions |
|
| Motor Length | 15.4 " |
| Product Weight | 32.19 lb |
| Product Weight with Pack | 32.74 lb |
| Shaft End | Spline |
Other |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | CSA |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Applications | These motors are built for dependable operation in 4” diameter or larger water wells. |
Share
