1 1

AMT

AMT 12SP10C-1P 1-1/4" Cast Iron Chemical Self-Priming Electric Motor Driven Centrifugal Pump (1 HP, TEFC, 56J, 115-208/230V, Single Phase, EPDM/EPR)

AMT 12SP10C-1P 1-1/4" Cast Iron Chemical Self-Priming Electric Motor Driven Centrifugal Pump (1 HP, TEFC, 56J, 115-208/230V, Single Phase, EPDM/EPR)

$689.12 USD
$944.00 USD $689.12 USD
Sale Sold out
Shipping calculated at checkout.

12SP10C-1P

AMT 12SP10C-1P 1-1/4" Cast Iron Chemical Self-Priming Electric Motor Driven Centrifugal Pump is the preferred option for industrial and commercial professionals when requiring high volume transfer, waste water drainage, and chemical processing. Designed, manufactured and tested in the USA. This model is equipped with a 1 HP electric motor and can self prime up to 20' with built-in check valve. A durable cast iron body increases overall strength while the EPDM/EPR shaft seal prolongs the longevity of the internal parts. AMT Pump Company is a subsidiary of The Gorman-Rupp Company.

Specifications:

  • Pump Body:  Cast Iron
  • Mechanical Seal:  EPDM/EPR
  • Maximum Flow Rate:  130 gpm - See Performance Chart
  • Ports:  1-1/4" NPT
  • Maximum Solids Handling Ability:  3/8"
  • Electric Motor: 1 HP, Single Phase, TEFC, 56J
  • Voltage:  115-208/230V
  • Weight:  61 lbs

This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and chemical processing. Pumps are designed to handle liquids with solids content or dissolved solids and debris. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8" diameter semi-solid and EPDM/EPR seals for liquid chemical transfer with specific gravities up to 1.3. (Verify chemical capability with liquids) Built-in check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Pumps feature Dual cycle 50/60 Hz TEFC motors.

Series Features:

  • Cast Iron Construction with EPDM/EPR Seals
  • Easy Cleanout Pull From Rear Design
  • 1˝ to 2˝ NPT Port Sizes
  • Maximum Temperature 180° F
  • Maximum Flow 130 GPM
  • Maximum Head 100 Ft. (43 PSI)
  • Self-Priming up to 20 Feet with Built-in Check Valve
  • Self-Cleaning, Clog Resistant Impeller
  • Solids Handling and Dirty Water Design
  • 1/2 to 3 HP, 56J, Dual Cycle 50/60 Hz, Single or Three Phase TEFC Motors
  • Motors Feature 303 Stainless Steel Shaft
View full details