1 1

AMT

AMT 282E-98 1-1/2" Stainless Steel Self-Priming Electric Motor Driven Centrifugal Pump (3 HP, TEFC, 56J, 230V, Single Phase, Viton®)

AMT 282E-98 1-1/2" Stainless Steel Self-Priming Electric Motor Driven Centrifugal Pump (3 HP, TEFC, 56J, 230V, Single Phase, Viton®)

$1,664.40 USD
$2,280.00 USD $1,664.40 USD
Sale Sold out
Shipping calculated at checkout.

282E-98

**This model is a Stainless Steel pump - stock photo is incorrect and shows cast iron pump body. Please contact customer service with any questions or concerns.**

AMT 282E-98 1-1/2" Stainless Steel Self-Priming Electric Motor Driven Centrifugal Pump is the preferred option when requiring high volume transfer, waste water drainage, and processing. Designed, manufactured and tested in the USA. This model is equipped with a 3 HP electric motor and can self prime up to 20' with built-in check valve. A chemically resistant stainless steel body increases overall strength while the Viton® shaft seal prolongs the longevity of the internal parts. AMT Pump Company is a subsidiary of The Gorman-Rupp Company.

Specifications:

  • Pump Body:  Stainless Steel
  • Mechanical Seal:  Viton®
  • Maximum Flow Rate:  120 gpm - See Performance Chart
  • Ports:  1-1/2" NPT
  • Electric Motor: 3 HP, Single Phase, TEFC, 56J
  • Voltage:  230V
  • Weight:  82 lbs

This line of AMT Self-Priming Centrifugal pumps is designed for industrial and commercial applications requiring high volume liquid transfer, waste water drainage and processing. These pumps feature a self-cleaning clog resistant impeller capable of handling up to 3/8″ diameter semi-solids. Built-in flapper/check valve enables consistent self-priming to 20 feet. Dual volute design reduces radial load on motor. Stainless steel models are especially effective in applications where rust and/or corrosion can develop in systems and also are highly resistant to erosion and chemicals.

Series Features:

  • 300 Series Investment Cast Stainless Steel Construction with Viton® Seals
  • Cast Iron Construction with Buna-N Seals
  • Optional Silicon Carbide Seals Available
  • 1-1/2˝ NPT Port Size
  • Maximum Temperature
    • Stainless Steel 200° F
    • Cast Iron 180° F
  • Maximum Flow 120 GPM
  • Maximum Head 102 Ft. (44 PSI)
  • Self-Priming up to 20 Feet with Built-in Check Valve
  • Self-Cleaning, Clog Resistant Impeller
  • 1/2 to 3 HP 56J Single or Three Phase 3450 RPM Motors
View full details