1 1

AMT

AMT 315B-98 2" x 1.5" Heavy Duty Straight Centrifugal Pump 316 Stainless Steel (3 HP, TEFC, 56J, 230/460V, Three Phase, Viton/SS)

AMT 315B-98 2" x 1.5" Heavy Duty Straight Centrifugal Pump 316 Stainless Steel (3 HP, TEFC, 56J, 230/460V, Three Phase, Viton/SS)

$1,848.96 USD
$2,568.00 USD $1,848.96 USD
Sale Sold out
Shipping calculated at checkout.

3151-98

AMT 3151-98 2" x 1.5" Heavy Duty Straight Centrifugal Pump, 316 Stainless Steel is the preferred option for liquid and chemical transfer, heating and cooling, recirculation, booster service, dirty water and other industrial applications. Designed, manufactured and tested in the USA. This model is equipped with a 3 HP electric motor to guarantee power and performance. A durable Cast Iron body increases overall strength while the Buna-N shaft seal prolongs the longevity of the internal parts. AMT Pump Company is a subsidiary of The Gorman-Rupp Company.

Specifications:

  • Pump Body: 316 Stainless Steel
  • Mechanical Seal: Viton/SS
  • Maximum Flow Rate:  500 GPM - See Performance Chart
  • Ports:  2" x 1.5" NPT
  • Maximum Head 194 FT (83 PSI)
  • Electric Motor: 3 HP, Three Phase, TEFC, 182JM
  • Voltage: 230/460V
  • Weight: 108 lbs

AMT Heavy Duty Solids Handling Centrifugal pumps are suited for liquid and chemical transfer, recirculation, booster service, dirty water and other industrial applications. Stainless steel units are especially effective in applications where rust and/or corrosion can develop in systems. Pumps are designed to handle liquids with solids content or dissolved solids and debris. Semi-open impeller features self-cleaning ability that makes the unit useful in applications involving up to 1/4” diameter solids and muddy or dirty liquids. Discharge position can be adjusted in 90° increments with vent and drain plugs for all positions. Type 21 mechanical seal and O-ring casing seal. Pumps are not self-priming and require flooded suction.

Series Features:

  • 300 Series Investment Cast Stainless Steel, Cast Bronze and Cast Iron Construction with Stainless Steel Impeller
  • Buna-N Mechanical Seal and O-Ring on Cast Iron Models
  • Viton® Mechanical Seal and O-Ring on Stainless Steel and Bronze Models
  • Optional Silicon Carbide SealsAvailable
  • Front Drain Plugs Located 90°Apart
  • Maximum Head 194 Feet (84 PSI)
  • Maximum Flow 500 GPM
  • 2 HP to 15 HP NEMA Motors, Single and Three Phase
  • Optional Mounting Base Available

  • Solids Handling and Dirty Water Design

View full details