AMT 489D-95 High Head Straight Centrifugal Pump Cast Iron (3/4 HP, 230/460V, Three Phase, TEFC, Suction 1-1/4" and Discharge 1")

The AMT 489D-95 Cast Iron is a high-head end-suction centrifugal pump designed for continuous-duty OEM, industrial, commercial, and processing applications including circulation, chemical processing, liquid transfer, and pressure boosting. The pump features cast iron construction, a stainless-steel closed impeller, and Buna-N mechanical seal and O-ring. Its pull-from-rear design allows servicing without disturbing existing piping. 

Specifications:

• Model: 489D-95
• Horsepower: 3/4 HP
• Voltage: 230/460V
• Phase: Three Phase
• Motor Enclosure: TEFC
• Motor Speed: 3450 RPM at 60 Hz
• Full Load Amps: 3/2A
• Suction: 1-1/4" Female NPT
• Discharge: 1" Female NPT
• Construction: Cast Iron
• Impeller: Stainless Steel
• Seal: Buna-N
• Maximum Temperature: 180°F
• Maximum Working Pressure: 150 PSI
• Maximum Solids: 1/8"
• Maximum Series Flow: 42 GPM
• Maximum Series Head: 77 Ft. (33 PSI)
• Dimensions: 14.2" L × 10.0" W × 8.6" H
• Shipping Weight: 43 lb
• Requires Flooded Suction / Not Self-Priming
• Motor can also operate at 50 Hz, with changes to amps, service factor, and RPM.
• QSP

Applications:
Circulation, Chemical Processing, Liquid Transfer, Pressure Boosting, Industrial Processing, Commercial Applications, OEM Applications, Heating and Cooling, Sprinkler Systems, Fire Protection Systems

Series Features:

• Stainless Steel, Bronze, and Cast Iron Construction
• Buna-N or Viton® Mechanical Seal and O-Ring, Depending on Model
• Optional Silicon Carbide Mechanical Seals Available
• Stainless Steel Motor Shaft and Hardware
• NEMA TEFC Single- or Three-Phase 3450 RPM Motors
• Optional ODP Motors Available
• NEMA Base-Mounted Motor
• Stainless Steel Impeller
• Discharge Rotates in 90° Increments
• Maximum Working Pressure: 150 PSI
• Maximum Temperature with Viton®: 200°F
• Maximum Temperature with Buna-N: 180°F
• (4) Front Drain Plugs, Located 90° Apart