AMT 5360-95 Suction Coolant/Oil Pump (1/2 HP, 230/460V, 3 Phase, 3/4" NPT)

The AMT 5360-95 is a 1/2 HP three-phase suction-type coolant and cutting-oil pump designed for industrial machine tools. It combines cast iron construction with a stainless steel semi-open impeller and carbon/ceramic shaft seal. The pump is designed for above-liquid installation and has a maximum suction lift of 2 ft. 

Specifications:
• Model: 5360-95
• Series: 536 Series
• Curve: C
• Type: Suction
• Horsepower: 1/2 HP
• Phase: Three Phase
• Voltage: 230/460 VAC, 50/60 Hz
• Full Load Amps at 60 Hz: 1.8/1.25A
• Motor: Totally Enclosed
• Speed: 3450 RPM at 60 Hz
• Connection: 3/4" NPT
• Construction: Cast Iron
• Impeller: Stainless Steel, Semi-Open
• Shaft: Carbon Steel
• Seal: Carbon/Ceramic
• Maximum Suction Lift: 2 ft
• Maximum Temperature: 180°F
• Maximum Recommended Viscosity: 500 SSU
• Shipping Weight: 37 lb

Series Features:

• Suction-Type Coolant/Oil Pump – Designed for circulating machine-tool coolant and spraying cutting oils
• Above-Liquid Installation – Designed to be mounted above the liquid level or in a remote location
• Up to 2 Ft. Suction Lift – Self-priming design provides a maximum suction lift of 2 feet
• Cast Iron Construction – Rugged construction for demanding machine-tool and industrial applications
• Stainless Steel Semi-Open Impeller – Provides excellent durability and resistance to corrosion and erosion
• Carbon Steel Shaft – Durable shaft construction for reliable operation
• Carbon/Ceramic Mechanical Shaft Seal – Provides dependable sealing in suction-type installations
• Handles Contaminated Coolants – Semi-open impeller design accommodates solids and fine contaminants
• Totally Enclosed Motor – Helps protect the motor from dirt, moisture and contaminants
• Permanently Lubricated, Sealed Motor Bearings – Designed for dependable operation with reduced maintenance
• 3450 RPM, 2-Pole Motor – Provides high-speed performance for coolant circulation applications
• Single- and Three-Phase Models Available – Available in configurations for a variety of machine-tool electrical systems
• Up to 180°F Liquid Temperature – Suitable for elevated-temperature coolant and cutting-oil applications
• Interchangeable Replacement Design – Designed as an economical replacement for pumps used on many domestic and imported machine tools
• Suitable for Non-Flammable Compatible Liquids – Intended for liquids chemically compatible with pump component materials

Applications:
Machine Tools, Coolant Circulation, Cutting Oil Spraying, Grinders, Metalworking Equipment, Industrial Machinery, Machine Coolant Systems.