Berkeley B82456-01 SSHM-2 Model Multi-Stage Irrigation Pump (2 HP, Single Phase, 230V, 4 Stage)

The Berkeley B82456-01 SSHM-2 Model Multi-Stage Irrigation Pump is self priming and features low electrical consumption and quiet operation. Berkeley tests all pumps before they leave the factory allowing you to purchase and install with confidence. Designed and manufactured by Pentair Berkeley, a trusted name in the industry.

Picture is a stock series photo - it may not match your model. Please contact customer service for assistance selecting the correct product.

Pump Material:  Cast Iron Suction Inlet, Motor Bracket and Pedestal - Polished 304 SS Outer Pump Shell

Voltage:  230V

Motor:  2 HP, Single Phase

Stages:  4

Ports:  1-1/2" x 1-1/4"

Maximum Water Temperature:  120 Degrees F

Duty Cycle:  Continuous

Frequency:  60 Hz

The Berkeley SSHM-2 Self-Priming Pump is the first to deliver high-pressure performance without priming problems and delays. Designed for minimal electrical consumption and quiet operation, the SSHM-2 takes less time and trouble to produce the water volume and high-pressure needed to meet demanding applications such as: Irrigation Systems, Water Supply Systems, Shower & Washing Systems, Dewatering, Heating & Air Conditioning Systems, Fountains

• Available in 3-stage or 4-stage designs for more options in head/flow.
• Self-priming design - Once initially primed, the SSHM-2 will automatically re-prime cycle after cycle.
• Cast iron motor bracket & integral pedestal for rigid pipe connections and base mounting.
• Suction flange is made of heavy-duty cast iron.
• Precision molded extra-smooth ports to maximize efficiency and performance.
• Special brass priming valve, proven to provide trouble-free operation during the priming cycle.

Applications:

• Residential and commercial turf irrigation, residential water systems, shower and washing systems, water transfer, heating and air conditioning systems, and water features and fountains.

Features: 

• Self-Priming Design: Once initially primed, the SSHM-2 remains primed cycle after cycle with check valve. 
• Stainless Steel Outer Shell: Polished 304 stainless steel shell. 
• Cast Iron Suction Inlet: 1-1/2” suction connection, heavy-duty durable cast iron suction bracket
• Cast Iron Motor Bracket and Integral Pedestal: 1-1/4” discharge connection with easy-access drain port for end of season draining, heavy-duty stable design for rigid pipe connections and solid base mounting

Specifications: 

• Motor: 2 HP, single-phase, 3450 RPM, 230-volt, high-service factor, capacitor-start/capacitor-run, open drip- proof motor, rated for continuous-duty operation. 230/460 TEFC available. 
• Impellers and Diffusers: Noryl® precision-molded extra-smooth ports to maximize efficiency and performance. 
• Shaft: 303 stainless steel. 
• Priming Valve: Special brass priming valve for trouble-free operation during the initial pump priming. 
• Mechanical Seal: High-pressure seal, carbonceramic seal faces, Buna-N elastomers. 
• Maximum Inlet Pressure: 20 PSI. 
• Maximum Discharge Pressure: 155 PSI. 
• Maximum Operating Temperature: 120°F (49°C). 
• Maximum Suction Lift: 15 feet. 
• Number of Stages: 3 or 4.