Franklin Electric
Franklin Electric 2261138020 - 6C3F 6" Encapsulated Submersible Motor - Sand Fighter (15 HP, Single Phase, 230V, 60, W)
Franklin Electric 2261138020 - 6C3F 6" Encapsulated Submersible Motor - Sand Fighter (15 HP, Single Phase, 230V, 60, W)
SKU:2261138020
Couldn't load pickup availability
The Franklin Electric 2261138020 - 6C3F 6" Encapsulated Submersible Motor - Sand Fighter Type. Franklin's 6" submersible motors are used in wells demanding high flow rates or deeper installation. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!
Please Note: Image is a stock photo and may not match exactly
Motor Shell Material: 300 Series SS
Voltage: 230V
Motor: 15 HP, Single Phase
Franklin's 6-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. These motors provide large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
Motor Specifications:
Ratings |
|
| HP 60Hz | 15 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Full Load | 62 A |
| Amps - Service Factor | 75 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Motor Connection | DOL |
| Thrust Bearing Rating | 3500 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 79.00 % |
| Protection [IP] | IP68 |
| Lead Wire Size | AWG #8 |
| Lead Retainer Method | Lead Jam Nut |
| Motor Insulation Classification | F |
| Poles | 2 |
| S.F. | 1.15 |
Operation |
|
| Motor Cooling | Water |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Ambient Temperature Rating Nominal | 30 °C |
| Thrust Bearing Rating | 3500 lb |
| Motor Adapter | Double flange |
| Rotation | Counter clockwise facing the shaft |
| SubTrol Heat Sensor | No |
| Winding Resistance (Main Winding) | .17-.22 |
Materials of Construction |
|
| Motor Shaft End - Material | 304SS |
| Thrust Bearing | Kingsbury Type |
| Seal Material | Silicon Carbide / Silicon Carbide |
| Seal | Mechanical Seal |
| Lead Insulation Material | Overmolded |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Bottom End Bell Material | Cast Iron with E-Coat Paint |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | FES91 |
| Motor Top End Bell Material | Cast Iron with E-Coat Paint |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Ends Material | Carbon Steel |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | 300 Series SS |
| Winding Material | Copper |
Dimensions |
|
| Motor Diameter - Physical Diameter | 5.44" |
| Motor Length | 36 " |
| Product Weight | 144 lb |
| Product Weight with Pack | 156 lb |
| Carton Length | 34.5 " |
| Carton Width | 7.25 " |
| Carton Height | 10.5 " |
| Shaft Diameter | 1 " |
| Shaft End | Spline |
Other |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Repair Kit Available | Yes |
Applications:
- These motors are built for dependable operation in 6” diameter or larger water wells.
Basic Features:
- Full 3450 RPM design point
- Maximum temperature winding wire NEMA class 200
- Anti-track, self-healing resin system
- Hermetically-sealed windings
- Removable Water-Bloc™ lead
- Double-flange design
- Over-molded lead for cable resilience.
- Stainless steel shell
- Kingsbury-type water lubricated thrust bearing
- Pressure-equalizing diapragm
- Sand slinger
- 3-lead and 6-lead (Wye Delta) configurations for 3-phase
- Copper bar rotor
- Select models are NSF/ANSI 61 certified
Special Features:
- 316 Stainless Steel: Special construction option for acid, low pH, and seawater applications. All 316 SS motors include a Subtrol-Plus™ heat sensor
- Sand Fighter® models include SubTrol-Plus™ heat sensor on 40, 50, and 60 hp models
Share
