1 1

Franklin Electric

Franklin Electric 2340563432S - 4" MagForce™ High Efficiency Motor - Water Well Type (10 HP, Three Phase, 230V, 120Hz, 3-Wire)

Franklin Electric 2340563432S - 4" MagForce™ High Efficiency Motor - Water Well Type (10 HP, Three Phase, 230V, 120Hz, 3-Wire)

$3,658.00 USD
$6,291.00 USD $3,658.00 USD
Sale Sold out
Shipping calculated at checkout.

2340563432S

The Franklin Electric 2340563432S - 4" MagForce™ High Efficiency Motor - Water Well Type - is powered with permanent magnet technology. Equipped with a 10 HP three phase motor, super stainless steel construction and Kingsbury-type thrust bearing this motor was designed to ensure your water continues to flow. Manufactured by Franklin Electric for quality and reliability when consistent performance is required. Please contact a member of Dade Pump's sales or service team for assistance in selecting the correct pump for your needs!

** Please Note:  Image is a stock photo and may not match exactly **

Product Specifications:

HP:  10

Phase:  Three

Voltage:  230

Hz: 120

Wire:  3-Wire

Motor Length:  22.39"

Weight:  44 lbs

Lead: Yes - 4'

Manufacturer Description:

Franklin Electric 4-Inch MagForce High Efficiency Motors are the next generation of submersibles powered by permanent magnet technology. Leveraging the unwavering reliability of Franklin Electric's submersible motor design, MagForce High Efficiency Motors offer improved performance over standard induction motors while also providing the features, benefits and robustness you trust for servicing water well applications.

Applications - Ideal for Long Run:

  • Groundwater remediation
  • Drainage water level control
  • Municipal/Utility water supply
  • Construction site dewatering
  • High volume and industrial livestock operations
  • Mine site dewatering and tank level control
  • Well supply geothermal HVAC systems

Basic Features:

  • High efficiency electrical desgin for low operational costs
  • Corrosion-resistant all stainless steel exterior construction
  • Stainless steel splined shaft
  • Hermetically-sealed windings
  • Anti-track self-healing resin system
  • Water lubrication
  • Filter check valve
  • Kingsbury-type thrust bearing
  • Pressure equalizing diaphragm
  • Built-in lightning arrestors
  • Continuous rating in 86° F (30 °C) water
  • Removable "Water-Bloc" lead
  • UL 778 recognized
  • CSA certified
  • ANSI/NSF 61 certified
  • NEMA mounting dimensions

Ratings
HP 60Hz 10 hp
HP 50Hz 10 hp
HP 120Hz 7.5-15 hp
Frequency 120 Hz
Phases Three-Phase
Amps - Full Load 19.8 A
Amps - Service Factor 26 A
Volts 230 VAC
Voltage Tolerance (%) -10.0% / +10.0%
Wire 3-Wire
Thrust Bearing Rating 1500 lb
Lead Length 4 ft
Motor Submersible
Continuous Duty Yes
Lead Wire Size AWG #14
Lead Retainer Method Lead Jam Nut
Motor Efficiency 90.0
Motor Insulation Classification B
Poles 4
S.F. 1.15
Service Factor - 50Hz Not Applicable

Operation
Motor Cooling Water
Minimum Cooling Flow .25 ft/sec
Motor Ambient Temperature Rating Nominal 86 °F
Thrust Bearing Rating 1500 lb
Rotation Counter clockwise facing the shaft
Submersible Use Yes

Materials of Construction
Check Valve No
Thrust Bearing Kingsbury Type
Seal Lip Seal Ring- Nitril
Lead Insulation Material XLPE
Diaphragm Material Nitrile Rubber (NBR)
Motor Construction Design Super Stainless
Motor Fill Solution (Water Soluble / Non Toxic) Yes
Motor Fill Solution Water + Propylene Glycol
Motor Top End Bell Material 304SS Cover painted cast iron
Shaft Slinger Material Nitrile Rubber (NBR)
Stator Fill Water/Propyleneglycol
Stator/ Motor Shell Material Stainless Steel
Winding Material Copper

Dimensions
Motor Length 22.39 "
Product Weight 43.65 lb
Product Weight with Pack 43.7 lb
Shaft End Spline

Other
Drinking Water Agency Approvals ANSI/NSF Standard 61
Electrical Agency Approvals CSA
Warranty Standard Time 12 Month Install / 24 Month Manufacturing
Applications These motors are built for dependable operation in 4” diameter or larger water wells.
View full details