Franklin Electric 2363118120 - 6C3F 6" Encapsulated Volt-X Dual Voltage Motor - Sand Fighter (7.5 HP, Three Phase, 230/460V, 6, W)

The Franklin Electric 2363118120 - 6C3F 6" Encapsulated Volt-X Dual Voltage Motor - Sand Fighter Type. This series separates itself with the ability to be run on either 230V or 460V. Franklin's 6" submersible motors are used in wells demanding high flow rates or deeper installation. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!

** Picture is stock photo and may not match exactly **

Product Specifications:

HP:  7.5

Voltage:  230/460

Phase:  Three

Weight:  110 lbs

Motor Connection:  DOL

Wire:  3-Wire

Manufacturer Description:

Franklin’s 6-inch dual voltage motor is typically used in large, demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last and come in a variety of construction options. 6-inch Volt-X motors are built with a unique dual voltage feature offering power supply flexibility. The 6-inch dual voltage motor utilizes an innovative voltage change device that allows the motor to be connected for operation in either 230 V or 460 V, three-phase, 60 Hz power supplies. The voltage exchange device has been meticulously developed for ease of removal and a watertight seal every time.

Series Specifications:

• New jam-nut style VCD plug device
• Maximum temperature winding wire NEMA class 200
• Anti-track self-healing resin system
• Hermetically-sealed windings
• Removable Water-Bloc™ lead
• Double-flange design
• Stainless steel shell
• Stainless steel splined shaft
• Kingsbury-type water lubricated thrust bearing
• Pressure-equalizing diaphragm
• Sand slinger
• 3-lead configuration
• Copper bar rotor
• Full 3450 RPM design point
• Filter check valve

  Ratings
  HP 60Hz	7.5 hp
  Frequency	60 Hz
  Phases	Three-Phase
  Amps - Full Load	10.9 A
  Amps - Service Factor	12.3 A
  Volts	230 VAC / 460 VAC
  Voltage Tolerance (%)	-10.0% / +10.0%
  Wire	3-Wire
  Motor Connection	DOL
  Thrust Bearing Rating	3500 lb
  Lead Length	13 ft
  Motor	Encapsulated
  Continuous Duty	Yes
  Efficiency Service Factor Load [%]	80.00 %
  Protection [IP]	IP68
  Lead Wire Size	AWG #10
  Lead Retainer Method	Lead Jam Nut
  Motor Insulation Classification	F
  Poles	2
  S.F.	1.15
  Operation
  Motor Cooling	Water
  Minimum Cooling Flow	.50 ft/sec
  Motor Ambient Temperature Rating Nominal	86 °F
  Thrust Bearing Rating	3500 lb
  Motor Adapter	Double flange
  Rotation	Counter clockwise facing the shaft
  SubTrol Heat Sensor	No
  Winding Resistance (Main Winding)	2.4-2.9

  Materials of Construction
  Motor Shaft End - Material	304 SS
  Thrust Bearing	Kingsbury Type
  Seal Material	Silicon Carbide / Silicon Carbide
  Seal	Mechanical Seal
  Lead Insulation Material	Overmolded
  Diaphragm Material	Nitrile Rubber (NBR)
  Motor Bottom End Bell Material	Cast Iron with E-Coat Paint
  Motor Fill Solution (Water Soluble / Non Toxic)	Yes
  Motor Fill Solution	FES91
  Motor Top End Bell Material	Cast Iron with E-Coat Paint
  Shaft Slinger Material	Nitrile Rubber (NBR)
  Stator Ends Material	Carbon Steel
  Stator Fill	Resin
  Stator/ Motor Shell Material	300 Series SS
  Winding Material	Copper
  Dimensions
  Motor Diameter - Physical Diameter	5.44"
  Motor Length	26.9 "
  Product Weight	96 lb
  Product Weight with Pack	110 lb
  Carton Length	34.5 "
  Carton Width	7.25 "
  Carton Height	10.5 "
  Shaft Diameter	1 "
  Shaft End	Spline
  Other
  Warranty Standard Time	12 Month Install / 24 Month Manufacturing
  Repair Kit Available	Yes