Franklin Electric 2366038120 - 6C3F 6" Encapsulated Submersible Motor - Sand Fighter (15 HP, Three Phase, 230V, 6, W) **Clearance/Excess Inventory**

Only Qty 1 in stock at clearance price. Never used.  Excess Inventory.

**All Sales Final - No Returns/Refunds**

The Franklin Electric 2366038120 - 6C3F 6" Encapsulated Submersible Motor - Sand Fighter Type. Franklin's 6" submersible motors are used in wells demanding high flow rates or deeper installation. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!

Motor Shell Material:  300 Series SS

Voltage:  230V

Motor:  15 HP, Three Phase

Franklin's 6-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. These motors provide large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.

Series Specifications:

• HP	15 hp
  Frequency	60 Hz
  Phases	Three-Phase
  Amps - Full Load	41.6 A
  Amps - Service Factor	47.4 A
  Volts	230 VAC
  Voltage Tolerance (%)	-10.0% / +10.0%
  Wire	3-Wire
  Motor Connection	DOL
  Thrust Bearing Rating	3500 lb
  Lead Length	13 ft
  Motor	Encapsulated
  Continuous Duty	Yes
  Efficiency Service Factor Load [%]	81.00 %
  Protection [IP]	IP68
  Lead Wire Size	AWG #10
  Lead Retainer Method	Lead Jam Nut
  Motor Insulation Classification	F
  Poles	2
  S.F.	1.15
  Motor Cooling	Water
  Minimum Cooling Flow	.50 ft/sec
  Motor Ambient Temperature Rating Nominal	86 °F
  Thrust Bearing Rating	3500 lb
  Motor Adapter	Double flange
  Rotation	Counter clockwise facing the shaft
  SubTrol Heat Sensor	No
  Winding Resistance (Main Winding)	.28-.35

Construction Material:

• Motor Shaft End - Material	304SS
  Thrust Bearing	Kingsbury Type
  Seal Material	Silicon Carbide / Silicon Carbide
  Seal	Mechanical Seal
  Lead Insulation Material	Overmolded
  Diaphragm Material	Nitrile Rubber (NBR)
  Motor Bottom End Bell Material	Cast Iron with E-Coat Paint
  Motor Fill Solution (Water Soluble / Non Toxic)	Yes
  Motor Fill Solution	FES91
  Motor Top End Bell Material	Cast Iron with E-Coat Paint
  Shaft Slinger Material	Nitrile Rubber (NBR)
  Stator Ends Material	Carbon Steel
  Stator Fill	Resin
  Stator/ Motor Shell Material	300 Series SS
  Winding Material	Copper

Certifications and Warranty: