1 1

Franklin Electric

Franklin Electric 2396006221 - 8C3F 8" Encapsulated Submersible Motor - 316 SS (40 HP, Three Phase, 460V380V, 50/60Hz, S)

Franklin Electric 2396006221 - 8C3F 8" Encapsulated Submersible Motor - 316 SS (40 HP, Three Phase, 460V380V, 50/60Hz, S)

$15,186.00 USD
$25,310.00 USD $15,186.00 USD
Sale Sold out
Shipping calculated at checkout.

2396006221

The Franklin Electric 2396006221 - 8C3F 8" Encapsulated Submersible Motor - 316 SS Type. Franklin's 8" submersible motors are used in wells demanding high flow rates or deeper installation. Avoid costly downtime with these 8" Franklin Electric motors. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!

Please Note:  Image is a stock photo and may not match exactly

Motor Specifications:

Motor Shell Material:  300 Series SS

Voltage:  380V/460V

Hz:  50/60

Motor:  40 HP, Three Phase

Motor Connection:  DOL

Manufacturer Description:

Franklin’s 8-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 8-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.

  • Full 3525 rpm design point for superior pump head & flow yield
  • Winding encapsulated in anti-tracking resin
  • Hermetically-sealed stator area
  • Kingsbury-type water lubricated thrust bearing
  • FES91 exclusive water based bearing lubrication
  • Water Bloc™ removable lead connection
  • Double flanged design for ease of handling and pump mounting
  • Spline shaft for maximum shaft and coupling contact
  • Copper bar rotor provides consistent design performance
  • Pressure equalizing diaphragm
  • Subtrol heat sensors standard on all 8” encapsulated 30 °C motors
  • NSF/ANSI 61 Certified for select models
  • 6-Lead (Y-D) Designs
  • 316 Stainless Steel Designs
  • Sand Fighter™ shaft seal standard on 150-200 hp and is an available option on 40-125 hp. All 316 SS motors have Sand Fighter™ shaft seal as standard
  • Other voltage and Hz design points available

Motor Specifications:

    Ratings
    HP 60Hz 40 hp
    Frequency 50Hz/60Hz
    Phases Three-Phase
    Amps - Full Load 53 A
    Amps - Service Factor 60 A
    Volts 380 VAC / 460 VAC
    Voltage Tolerance (%) -10.0% / +10.0%
    Wire 3-Wire
    Motor Connection DOL
    Thrust Bearing Rating 10000 lb
    Lead Length 13 ft
    Motor Encapsulated
    Continuous Duty Yes
    Efficiency Service Factor Load [%] 86.00 %
    Protection [IP] IP68
    Lead Wire Size AWG #8
    Motor Insulation Classification F
    Poles 2
    S.F. 1.15

    Operation
    Motor Cooling Water
    Minimum Cooling Flow .50 ft/sec
    Motor Ambient Temperature Rating Nominal 86 °F
    Thrust Bearing Rating 10000 lb
    Motor Adapter Double flange
    Rotation Counter clockwise facing the shaft
    SubTrol Heat Sensor Yes
    Winding Resistance (Main Winding) .24-.30

    Materials of Construction
    Motor Shaft End - Material 17-4SS
    Thrust Bearing Kingsbury Type
    Seal Mechanical Seal
    Lead Insulation Material XLPE
    Diaphragm Material Nitrile Rubber (NBR)
    Motor Bottom End Bell Material 316 SS
    Motor Fill Solution (Water Soluble / Non Toxic) Yes
    Motor Fill Solution FES91
    Motor Top End Bell Material 316 SS
    Shaft Slinger Material Nitrile Rubber (NBR)
    Stator Ends Material 316 SS
    Stator Fill Resin
    Stator/ Motor Shell Material 316 SS
    Winding Material Copper

    Dimensions
    Motor Diameter - Physical Diameter 7.70"
    Motor Length 36.4 "
    Product Weight 291 lb
    Product Weight with Pack 320 lb
    Carton Length 52.25 "
    Carton Width 9 "
    Carton Height 17 "
    Shaft Diameter 1.5 "
    Shaft End Spline

    Other
    Electrical Agency Approvals UL
    Warranty Standard Time 12 Month Install / 24 Month Manufacturing
    Repair Kit Available Yes
    View full details