Franklin Electric
Franklin Electric 2396248641 - 8C3F 8" Encapsulated Submersible Motor - Sand Fighter (100 HP, Three Phase, 460V/380V, 50/60Hz, W)
Franklin Electric 2396248641 - 8C3F 8" Encapsulated Submersible Motor - Sand Fighter (100 HP, Three Phase, 460V/380V, 50/60Hz, W)
SKU:2396248641
Couldn't load pickup availability
The Franklin Electric 2396248641 - 8C3F 8" Encapsulated Submersible Motor - Sand Fighter Type. Franklin's 8" submersible motors are used in wells demanding high flow rates or deeper installation. Avoid costly downtime with these 8" Franklin Electric motors. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!
Please Note: Image is a stock photo and may not match exactly
Motor Specifications:
Motor Shell Material: 300 Series SS
Voltage: 380V/460
Hz: 50/60
Motor: 100 HP, Three Phase
Motor Connection: Y-Δ
Manufacturer Description:
Franklin’s 8-inch submersible motor is typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options. This 8-inch submersible motor provides large amounts of water for irrigation, community water systems, and factories where large flows or pressures are required. We understand how important it is to produce reliable systems to avoid significant costs due to failure or downtime.
- Full 3525 rpm design point for superior pump head & flow yield
- Winding encapsulated in anti-tracking resin
- Hermetically-sealed stator area
- Kingsbury-type water lubricated thrust bearing
- FES91 exclusive water based bearing lubrication
- Water Bloc™ removable lead connection
- Double flanged design for ease of handling and pump mounting
- Spline shaft for maximum shaft and coupling contact
- Copper bar rotor provides consistent design performance
- Pressure equalizing diaphragm
- Subtrol heat sensors standard on all 8” encapsulated 30 °C motors
- NSF/ANSI 61 Certified for select models
- 6-Lead (Y-D) Designs
- 316 Stainless Steel Designs
- Sand Fighter™ shaft seal standard on 150-200 hp and is an available option on 40-125 hp. All 316 SS motors have Sand Fighter™ shaft seal as standard
- Other voltage and Hz design points available
Motor Specifications:
Ratings |
|
| HP 60Hz | 100 hp |
| Frequency | 50Hz/60Hz |
| Phases | Three-Phase |
| Amps - Full Load | 126 A |
| Amps - Service Factor | 142 A |
| Volts | 380 VAC / 460 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 6-Wire |
| Motor Connection | Y-Δ |
| Thrust Bearing Rating | 10000 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 89.00 % |
| Protection [IP] | IP68 |
| Lead Wire Size | AWG #4 |
| Motor Insulation Classification | F |
| Poles | 2 |
| S.F. | 1.15 |
Operation |
|
| Motor Cooling | Water |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 10000 lb |
| Motor Adapter | Double flange |
| Rotation | Counter clockwise facing the shaft |
| SubTrol Heat Sensor | Yes |
| Winding Resistance (Main Winding) | .07-.09 |
Materials of Construction |
|
| Motor Shaft End - Material | 17-4SS |
| Thrust Bearing | Kingsbury Type |
| Seal | Mechanical Seal |
| Lead Insulation Material | XLPE |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Bottom End Bell Material | Cast Iron with E-Coat Paint |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | FES91 |
| Motor Top End Bell Material | Cast Iron with E-Coat Paint |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Ends Material | Carbon Steel |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | 300 Series SS |
| Winding Material | Copper |
Dimensions |
|
| Motor Diameter - Physical Diameter | 7.70" |
| Motor Length | 57.3 " |
| Product Weight | 527 lb |
| Product Weight with Pack | 585 lb |
| Carton Length | 67 " |
| Carton Width | 9 " |
| Carton Height | 17 " |
| Shaft Diameter | 1.5 " |
| Shaft End | Spline |
Other |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Month Install / 24 Month Manufacturing |
| Repair Kit Available | Yes |
Share
