Franklin Electric 2648665321 - 10RW 10" Rewindable Submersible Motor - Sand Fighter (250 HP, Three Phase, 575V, 60Hz)

The Franklin Electric 2648665321 - 10RW 10" Rewindable Submersible Motor - Sand Fighter is filled with a special FES93 fluid, providing frost protection. Franklin's 10" submersible motors are used in wells demanding high flow rates or deeper installation. Avoid costly downtime with these 10" Franklin Electric motors. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!

Please Note:  Image is a stock photo and may not match exactly

Motor Specifications:

Motor Shell Material:  304 SS

Voltage:  575

Hz:  60

Motor:  250 HP, Three Phase

Motor Connection:  Y-Δ

Manufacturer Description:

The 10-inch rewindable motor, manufactured in ISO 9001 certified facilities, is built for dependable operation in 10" diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The 10-inch rewindable motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The Sand fighter® SiC seal system is standard. For applications in aggressive media, motors made of 316 SS and 904 L are available.

• Easy to assemble with double flange
• Cable material according to drinking water regulations (VDE/ACS/KTW approved)
• Sand fighter® SiC seal system for high performance in sand
• High efficiency electrical design for low operation cost
• All motors prefilled and 100% tested
• Max. storage temperature 5 °F (-15 °C) to 140 °F (60 °C)
• Design for retrofitable PT100 sensor
• Non contaminating FES 93 filled design
• NSF/ANSI 61 Certified

Options:

• Other voltages
• Y∆ - start (pos. of cables 90°)
• Motors in complete 316 SS and 904 L
• PT 100 temperature sensor (sold separately)
• Lead in different lengths up to 165 ft. (50 m)

Technical Specifications:

• 10" Three-Phase Motors, 2-Pole, 3600 RPM
• 130-185 kW / 175-250 hp
• 10" flange
• IP 68 protection
• 10 maximum starts per hour
• Vertical and horizontal installation (excluding 185 kW / 250 hp motors)
• Motor Lead in 20 ft. (6 m) length
• 380-415 V/50 Hz, 460 V/60 Hz, and 575 V/60 Hz standard voltages
• Voltage tolerance (50 Hz): -10% / +6% UN [380-415V = (380-10%) – (415+6%)]
• Voltage tolerance (60 Hz): ±10% UN
• PE2/PA winding insulation for max. ambient temp. of 113 °F (45 °C) at the same cooling conditions as standard

Motor Specifications: