Franklin Electric 2656905021 - 12RW 12" Rewindable Submersible Motor - Sand Fighter (250 HP, Three Phase, 575V, 60Hz, DOL)

The Franklin Electric 2656905021 - 12RW 12" Rewindable Submersible Motor - Sand Fighter is filled with a special FES93 fluid, providing frost protection. Franklin's 12" submersible motors are used in wells demanding high flow rates or deeper installation. Avoid costly downtime with these 12" Franklin Electric motors. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!

Please Note:  Image is a stock photo and may not match exactly

Motor Specifications:

Motor Shell Material:  304 SS

Voltage:  575

Hz:  60

Motor:  250 HP, Three Phase

Motor Connection:  DOL

Manufacturer Description:

The 12-inch rewindable motor, manufactured in ISO 9001 certified facilities, is built for dependable operation in 12" diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The 12-inch rewindable motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor.

• Easy to assemble with double flange
• Cable material according to drinking water regulations (VDE/ACS/KTW approved)
• Sand fighter® SiC seal system for high performance in sand
• High efficiency electrical design for low operation cost
• All motors prefilled and 100% tested
• Max. storage temperature 5°F (-15 °C) to 140 °F (60 °C)
• Design for retrofitable PT100 sensor
• Non contaminating FES 93 filled design
• NSF/ANSI 61 Certified

Options:

• 80 kN thrust load
• Other voltages
• Y∆ - start (pos. of cables 90°)
• PT 100 temperature sensor (sold separately)
• Special lead lengths available upon request
• 316 SS construction

Technical Specifications:

• 12" Three-Phase Motors, 2-Pole, 3600 RPM
• 185-400 kW / 250-536 hp
• 12" flange
• IP 68 protection
• 5 maximum starts per hour
• Vertical and horizontal installation
• Motor Lead in 20 ft. (6 m) length
• 460 V/60 Hz and 575 V/60 Hz standard voltages
• Voltage tolerance (50 Hz): -10% / +6% UN [380-415V = (380-10%) – (415+6%)]
• Voltage tolerance (60 Hz): ±10% UN
• 30 ºC ambient temperature with a minimum cooling flow: v = 0.5 m/s

Motor Specifications: