Franklin Electric
Franklin Electric 2766033003 - 6H3F 6" Encapsulated High-Temp Submersible Motor - 316 SS (15 HP, Three Phase, 230V, 60Hz, S)
Franklin Electric 2766033003 - 6H3F 6" Encapsulated High-Temp Submersible Motor - 316 SS (15 HP, Three Phase, 230V, 60Hz, S)
SKU:2766033003
Couldn't load pickup availability
The Franklin Electric 2766033003 - 6H3F 6" Encapsulated High-Temp Submersible Motor - 316 SS Type - can handle water temperatures up to 194 Degrees F (90 Degrees C). Franklin's 6" submersible motors are used in wells demanding high flow rates or deeper installation. Designed and manufactured by Franklin Electric for quality and reliability when high flow or pressure is needed. Please contact a member of our sales or service team for assistance in selecting the correct pump for your needs!
Motor Specifications:
Motor Shell Material: 300 Series SS
Voltage: 230V
Hz: 60
Motor: 15 HP, Three Phase
Motor Connection: DOL
Manufacturer Description:
Demanding pumping applications have higher requirements. That’s why Franklin’s Hi-Temp Submersible Motors are engineered and tested to deliver exceptional performance in challenging, high-temperature well applications and/or low-flow conditions.
The 6-inch High-Temp Motor utilizes a distinctive premium encapsulation process and water-soluble coolant to allow dependable, continuous operation in 6" diameter or larger water wells with water temperatures up to 90 ºC (provided minimum allowable flow rates past the motor are maintained). This submersible motor is powered by design and can handle thrust loads 25% higher than a standard motor without oil. Its superior construction comes with water-lubricated radial and thrust bearings to benefit from a maintenance-free operation.
Series Features & Benefits:
- Up to 194 °F (90 °C) ambient temperature
- 100% increase in upthrust capability at 30 °C
- 25% increase in downthrust capability at 30 °C
- Wet Well, Reservoir, Low Flow approved in 12” diameter or larger wells with ambient water
up to 87 °F (30 °C) - High temperature leads
- Hermetically sealed stator
- Innovative high temperature winding encapsulation system
- FES92 exclusive water soluble, high temperature bearing lubrication
- Double-flange NEMA mounting for ease of handling and pump mounting
- Stainless steel splined shaft for maximum shaft/coupling contact
- Full 3450 RPM 60Hz design point for superior pump performance
- Sand Fighter™ Sealing System
- Franklin Electric’s exclusive Water-Bloc™ lead connection
- 316 SS and Y-∆ - consult factory
- Extended warranty available when used with FE Submonitor overload protection
Product Specifications:
Ratings |
|
| HP 60Hz | 15 hp |
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 42.2 A |
| Amps - Service Factor | 47.4 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Motor Connection | DOL |
| Thrust Bearing Rating | 3500 lb |
| Lead Length | 13 ft |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 81.00 % |
| Protection [IP] | IP68 |
| Lead Wire Size | AWG #8 |
| Lead Retainer Method | Lead Jam Nut |
| Motor Insulation Classification | F |
| Poles | 2 |
| S.F. | 1.15 |
Operation |
|
| Motor Cooling | Water |
| Minimum Cooling Flow | .50 ft/sec |
| Motor Ambient Temperature Rating Nominal | 194 °F |
| Thrust Bearing Rating | 3500 lb |
| Motor Adapter | Double flange |
| Rotation | Counter clockwise facing the shaft |
| SubTrol Heat Sensor | No |
| Winding Resistance (Main Winding) | .28-.35 |
Materials of Construction |
|
| Motor Shaft End - Material | 17-4SS |
| Thrust Bearing | Kingsbury Type |
| Seal Material | Silicon Carbide / Silicon Carbide |
| Seal | Mechanical Seal |
| Lead Insulation Material | Overmolded |
| Diaphragm Material | Fluoroelastomers FKM |
| Motor Bottom End Bell Material | 316 SS |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | FES92 |
| Motor Top End Bell Material | 316 SS |
| Shaft Slinger Material | Fluoroelastomers (FKM) |
| Stator Ends Material | 316 SS |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | 316 SS |
| Winding Material | Copper |
Dimensions |
|
| Motor Diameter - Physical Diameter | 5.44" |
| Motor Length | 30.9 " |
| Product Weight | 121 lb |
| Product Weight with Pack | 131 lb |
| Carton Length | 34.5 " |
| Carton Width | 7.25 " |
| Carton Height | 10.5 " |
| Shaft Diameter | 1 " |
| Shaft End | Spline |
Other |
|
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Repair Kit Available | Yes |
Share
