Franklin Electric
Franklin Electric V4PS60IGP-M231 60" PowerSewer System with Manual Grinder Pump (2 HP, 230V, Single Phase, 60" Basin)
Franklin Electric V4PS60IGP-M231 60" PowerSewer System with Manual Grinder Pump (2 HP, 230V, Single Phase, 60" Basin)
SKU:V4PS60IGP-M231
Couldn't load pickup availability
Franklin Electric V4PS60IGP-M231 60" PowerSewer System with Manual Grinder Pump is designed for both residential and commercial applications. A powerful 2 HP motor and the pump's brass vortex impeller ensure limited downtime. Focused on efficiency and quality - this system is available in a variety of basin sizes. Contact a Dade Pump representative today for assistance in selecting the correct product for your sewer system needs.
Specifications:
Motor: 2 HP, Single Phase
Voltage: 230V
Cord Length: 10'
Discharge: 1.25"
Full Load Amps: 13.9
Basin Height: 60"
Features & Benefits:
- Shallow Dry Well
- Pump Lift Handle
- Drop Inlet
- Anti-Shear Discharge
- IPS - Isolated Pump Support
- Float Tree Assembly
- Flex Connector
- Anti-Siphon Check Valve
FPS PowerSewer® System has a more flexible, service friendly, and efficient system for residential and commercial applications. This low-pressure sewer system is available in 60-,72-, 84-, and 96-inch basin sizes and pumps wastewater to a collection or treatment area, making it a proven alternative to gravity sewer systems and septic tanks. Featuring an isolated pump support that can accommodate heavier pumps for expanded applications. Providing added installation flexibility through the compatibility with the entire line of FPS grinder pumps. Inclusion of the FPS high head grinder allows the PowerSewer System to produce a maximum shut off head of 200 feet, with a maximum flow of 35 gpm.
Ratings |
|
| HP 60Hz | 2 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Full Load | 13.9 A |
| Volts | 230 VAC |
| Lead Length | 10 ft |
| Continuous Duty | Yes |
| Motor Insulation Classification | F |
Operation |
|
| Maximum Flow Rate - 60 Hz | 33 gpm |
| Minimum Flow Rate - 60 Hz | 9 gpm |
| Shut Off | 120 ft |
| Minimum Head - 60 Hz | 0 ft |
| Shut Off 60 Hz | 130 ft |
| Motor Cooling | Fully Submerged |
| Pump rpm - 60 Hz | 3450 |
Liquid |
|
| Maximum Fluid Temperature | 40 °C |
Materials of Construction |
|
| Impeller | Vortex |
| Impeller Material | Brass |
| Motor Shaft End - Material | Stainless Steel |
| Intake Screen Material | Stainless Steel |
| Seal Material | Carbon / Ceramic / Viton |
| Seal | Mechanical Seal |
| Basin Cover Material | Fiberglass |
| Basin Cover Style | 1-piece |
| Basin Cover | Solid |
| Basin Diameter | 30 " |
| Basin Inlet Hub | Snap-in Vinyl Hub |
| Basin Material | HDPE |
| Basin Package Assembly Level | Pre-packaged (assembly required) |
| Basin Pump Quantity | 1 |
| Basin Vent Diameter | 2" |
| Motor Fill Solution | Oil (white oil) |
| Rotating Cutter Material | AISI 440C Rockwell 55-60C |
| Volute / Side Inlet Material | Cast Iron |
| Stationary Cutter Material | AISI 440C Rockwell 55-60C |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Impeller Diameter | 6.25 " |
| Pump Length | 11.4 " |
| Product Weight | 260 lb |
| Product Weight with Pack | 275 lb |
| Basin Height | 60 " |
| Pump Height | 16.1 " |
| Pump Width | 9.6 " |
| Shaft Diameter | 1.13 " |
Other |
|
| Electrical Agency Approvals | cCSAus |
| Warranty Standard Time | 24 Month Install / 36 Month Manufacturing |
| Applications | Low Pressure Sewer |
Share
