Goulds 25GS10412CL GS Series 4" Stainless Steel Submersible Pump (1 HP, 230V, Single Phase, 3-Wire, 7 Stage)

The Goulds 25GS10412CL GS Series 4" Stainless Steel Submersible Pump is a 1 HP, 25 GPM, 7 Stage, 3-Wire option designed and built in the USA. The GS series is one of the most popular options for residential and light municipal Enjoy both increased pressure and flow compared to other manufacturers. All Goulds GS Series pumps are 100% factory tested to ensure flawless operation upon installation. Dade Pump & Supply is a factory authorized distributor and your pump comes with a full factory warranty. Please contact a Dade Pump representative for assistance in selecting the correct pump for your needs.

Picture is stock photo - please contact customer service for assistance in selecting the correct pump and motor for your needs.

Manufacturer Description:

Goulds Water Technology GS series 4" submersible pumps provide a stainless steel construction and corrosion resistance. Available in 5 to 25 gallon per minute sizes equipped with 1/2 HP to 5 HP motors. Goulds Water Technology offers a variety of submersible well pumps with motors rated for continuous duty. These below ground pumps are designed for residential and small municipal water supply as well as light irrigation applications. Designed and assembled in the USA. 100% performance tested.

Specifications:

HP:  1

Voltage:  230V

Number of Stages:  7

Best Efficiency Flow Rate:  25 GPM

Recommended Flow Range:  8-33 GPM

Weight:  31 lbs

Materials of Construction:

• Discharge Head AISI 303 SS
• Check Valve Poppet AISI 304 SS
• Check Valve Seal BUNA, FDA compliant
• Check Valve Seat AISI 304 SS
• Check Valve Retaining Ring AISI 302 SS
• Bearing Spider - Upper Noryl® GFN2
• Bearing Proprietary Engineered Polymer
• Klipring AISI 301 SS
• Diffuser Lexan®
• Impeller Noryl®
• Bowl AISI 304 SS
• Intermediate Sleeve * AISI 304 SS, Powder Metal
• Intermediate Shaft Coupling * AISI 304 SS, Powder Metal
• Intermediate Bearing Spider * Glass Filled Engineered Composite
• Intermediate Bearing Spider * AISI 303 SS
• Shim AISI 304 SS
• Screws – Cable Guard AISI 304 SS
• Motor Adapter AISI 303 SS
• Casing AISI 304 SS
• Shaft AISI 304 SS
• Coupling AISI 304 SS Powder Metal
• Cable Guard AISI 304 SS
• Suction Screen AISI 304 SS

Series Features:

• Powered for Continuous Operation: All ratings are within the working limits of the motor as recommended by the motor manufacturer. Pump can be operated continuously without damage to the motor.
• Field Serviceable: Units have left hand threads and are field serviceable with common tools and readily available repair parts.
• Sand Handling Design: Our face clearance, floating impeller stack has proven itself for over 50 years as a superior sand handling, durable pump design.
• FDA Compliant Non-Metallic Parts: Impellers, diffusers and bearing spiders are constructed of glass filled engineered composites. They are corrosion resistant and non-toxic.
• Discharge Head/Check Valve: Cast 303 stainless steel for strength and durability. Two cast-in safety line loops for installer convenience. The built-in check valve is constructed of stainless steel and FDA compliant BUNA rubber for abrasion resistance and quiet operation.
• Motor Adapter: Cast 303 stainless steel for rigid, accurate alignment of pump and motor. Easy access to motor mounting nuts using standard open end wrench.
• Stainless Steel Casing: Polished stainless steel is strong and corrosion resistant.
• Hex Shaft Design: Six sided shafts for positive impeller drive. Engineered Polymer Bearings: The proprietary, engineered polymer bearing material is strong and resistant to abrasion and wear. The enclosed upper bearing is mounted in a durable Noryl® bearing spider for excellent abrasion resistance