Goulds
Goulds SJ10 SJ Series Vertical Deep Well Jet Pump (1 HP, Single Phase, 115/230V)
Goulds SJ10 SJ Series Vertical Deep Well Jet Pump (1 HP, Single Phase, 115/230V)
SKU:SJ10
Couldn't load pickup availability
The Goulds SJ10 1 HP SJ Series Vertical Deep Well Jet Pump is specifically designed for farms, homes and cottages with wells deeper than 25'. This series is also NSF Listed ensuring your safety. Each pump is tested before leaving the factory allowing installation with confidence. Designed and manufactured by Goulds Water Technology, a trusted name in the industry.
Specifications:
Pump Casing Material: Cast Iron
Stages: 2
Voltage: 115/230V
Motor: 1 HP, Single Phase
Impeller Material: Glass-Filled Thermoplastic
Ports: 1-1/4" NPT Suction, 1" NPT Discharge, 1" NPT Pressure
Maximum Operating Flow Rate: 16.0 gpm - See Performance Chart
Maximum Water Temperature: 140 Degrees F
Duty Cycle: Continuous
Speed: 3500 rpm
Frequency: 60 Hz
Goulds Water Technology offers a robust line of Jet Pumps ideal for delivering and boosting water in a variety of applications. Withstanding rigorous testing, these jet pumps provide industry-leading benefits and are backed by over 170 years of dedicated service and support. Rely on a jet pump from Goulds Water Technology for trusted performance right out of the box.
The SJ is a vertical deep well jet pump. Specifically designed for homes, farms, and cottages where the well is deeper than 25΄. This type of pump setup requires either a twin pipe system or a packer system. A twin pipe assembly can pump as deep as 200΄ while a packer assembly can go to depths of 230΄. The hp ranges from ¾ hp to 2 hp.
• Basic Pump Unit: Includes pump, motor, pressure switch, tubing, fittings, pressure gauge, bushing and AV21 pressure control valve.
• Deep Well Jet Assembly Package: Twin Pipe includes: Jet body, nozzle, venturi and foot valve. Packer includes: Jet body with builtin check valve, nozzle and venturi.
• Additional Accessories Required: For Packer: well casing adapter AWD2 (2") or AWD3 (3").
- High Capacity and Pressure: Specifically designed to deliver high capacities at deeper settings.
- Stainless Steel Pump Shaft: Hex design provides positive drive for impellers and eliminates clearance adjustments.
- Easy to Service: Can be taken apart for service by removing four bolts.
- Corrosion Resistant: Glass filled thermoplastic impellers. Stainless steel wear rings and coverplates. Electrocoat paint process applied inside and out and then baked on.
- Powered for Continuous Operation: Pump is designed for continuous operation. All ratings are within the motor manufacturer’s recommended working limits.
- Easy to Prime: Top mounted vent plug allows air to escape from seal cavity during initial priming.
- Adjustable Automatic Pressure Control Valve: Guarantees maximum capacity at all times. By-pass check valve equalizes pressure in entire system and helps prevent loss of prime.
- NSF Listed: The first NSF listed jet pumps in the industry. All jet pumps and shallow well components only, deep well components are not listed.
- Pressure switch — ¾-1½ HP, AS4 2 HP, AS10 both preset (30-50 PSI)
- NEMA standard
- ¾-1½ HP, 115/230 V, 60 Hz, capacitor start
- 2 HP, 230 V only, 60 Hz
- Single phase, 3500 RPM
- Built-in overload with automatic reset
- Stainless steel shaft
- Rotation: clockwise when viewed from motor end.
Applications:
Specifically designed for:
• Homes • Farms • Cottages
Share
