Pearl FBSMS05 15G30P-A Flux Boosting System (1/2 HP, Single Phase, 115V)

The Pearl FBSMS05 15G30P-A FBSMS Flux Boosting System is a pump and electronic controller package designed to boost water pressure when incoming supply pressure is insufficient. The system automatically starts and stops the pump in response to water demand, providing convenient pressure boosting for residential, irrigation, and water treatment applications.

This configuration pairs the Pearl MSC20 05A16S pump with the PCFX 16A16S electronic controller. It operates at 115V, single phase, with a 0.5 HP pump and a listed maximum current of 8.2 amps. The system has 1-inch suction and discharge connections and weighs 28 lbs.

The FBSMS series is rated for a maximum pressure of 66 PSI and a flow range of 5–25 GPM. These are series-level specifications; actual operating performance depends on the selected model and installation.

Features:

• Automatic Pump Start and Stop
• Integrated Pump and Electronic Controller
• 0.5 HP Pump
• 115V Single Phase
• 8.2 Amp Maximum Current
• 1-Inch Suction Connection
• 1-Inch Discharge Connection
• 66 PSI Series Maximum Pressure
• 5-25 GPM Series Flow Range
• Pump Model MSC20 05A16S
• Controller Model PCFX 16A16S

Applications:

• FLUX BOOSTING SYSTEM is made up of a water pump and an electronic pump controller which is used for: Residential irrigation applications when is necessary to boost the pressure coming from the city water or a well pump.
• Residential Water Pressure Boosting
• Irrigation Systems
• Water Treatment
• Domestic Water Supply
• Incoming Water Pressure Boosting
• Automatic Water Pump Operation

Technical Specifications:

• Model: FBSMS05 15G30P-A
• Pump: MSC20 05A16S
• Controller: PCFX 16A16S
• Motor Power: 0.5 HP
• Voltage: 115V
• Phase: 1
• Maximum Current: 8.2 A
• Suction: 1 inch
• Discharge: 1 inch
• Weight: 28 lbs
• Maximum Pressure (Series): 66 PSI
• Flow Range (Series): 5–25 GPM

The FLUX BOOSTING SYSTEM monitors the flow rate of the water running through and protects the pump against dangerous working conditions like running dry.

When a tap is opened and the water demand exceeds the minimum starting flow, FLUX starts the pump and keeps it running, delivering constant flow, even when capacity request is low. FLUX BOOSTING SYSTEMS stops the pump when the demand is below 0.5 gal/min. In case of a leak on the system (less than 0.5 gal/min) FLUX BOOSTING SYSTEM will never start the pump avoiding useless power consumption.

SERIES FEATURES AND BENEFITS:

• FLUX’s body made of technopolymer with a built-in check valve.
• FLUX BOOSTING SYSTEM comes available with different pumps to boost in coming pressures up to 70 psi higher.
• Friction losses extremely low: this is why it is possible to use FLUX BOOSTING SYSTEM with capacity up to 50 gpm.
• The special valve guarantees the pump continuous operation.
• Circuit board: easy to replace and available in 115V and 230V.
• ALS NSF/ANSI/CAN 61 & 372 Certified.