Pearl JCC 07F16P Self-Priming Shallow Well Jet Pump (0.75 HP, 115/230V, Single Phase, Cast Iron)

The Pearl JCC 07F16P is a 3/4 HP self-priming shallow well jet pump featuring a cast iron casing, brass impeller, and built-in ejector, paired with a 115/230V single-phase motor. Engineered for dependable water supply, pressure boosting, and irrigation applications, the JCC series incorporates an exclusive diffuser with flow control device for fast self-priming, quiet operation, and compact installation.

The JCC series is designed to be robust and tolerant of temporary abnormal operating conditions. Its space-saving construction allows installation in restricted areas and makes it suitable for retrofit applications. Fast air evacuation helps prevent air pockets around the mechanical seal, reducing the possibility of seal failure caused by insufficient cooling and flushing.

With the ability to lift water from depths up to 29 feet in less than 3 minutes under specified conditions, the JCC series provides reliable performance for shallow well suction lift applications. Its advanced diffuser and flow control device guide water into the central pump casing, reducing turbulence, velocity, and hydraulic noise.

SPECIFICATIONS:

• Manufacturer: Pearl
• Model: JCC 07F16P
• Horsepower: 3/4 HP
• Voltage: 115/230V
• Phase: Single Phase
• Maximum Amperage: 10.5/5.4 Amps
• Suction Connection: 1 Inch
• Discharge Connection: 1 Inch
• Weight: 32 lbs
• Pump Type: Self-Priming Shallow Well Jet Pump

FEATURES:

• 3/4 HP Motor
• 115/230V Single-Phase Operation
• Maximum Motor Amperage of 10.5/5.4 Amps
• Self-Priming Shallow Well Jet Pump Design
• Cast Iron Pump Casing
• Brass Impeller
• AISI 304 Stainless Steel Casing Cover
• Built-In Ejector
• Exclusive Diffuser with Flow Control Device
• Fast Self-Priming Capability
• Suction Lift Capability Up to 29 Feet Under Specified Conditions
• Low-Noise Operation
• Compact Design for Restricted Spaces
• 1-Inch Suction Connection
• 1-Inch Discharge Connection
• NPT Threaded Connections
• Continuous Duty Motor Design
• Carbon-Ceramic-NBR Mechanical Seal

APPLICATIONS:

• Drawing Water from Wells
• Pumping Water Containing Air or Other Gases
• Increasing Water Pressure from Flooded Suction
• Pressure Boosting for Central Water Systems
• Garden Irrigation
• Water Jet Washing
• Domestic Water Supply

CONSTRUCTION & MATERIALS:

• Pump Casing: Cast Iron GJL 200 EN 1561
• Casing Cover: AISI 304 Stainless Steel
• Impeller: Brass P-Cu Zn 40 Pb 2 UNI 5705
• Wear Ring: AISI 304 Stainless Steel
• Diffuser: PPO-GF20 (Noryl)
• Ejector: PPO-GF20 (Noryl)
• Shaft: Chrome Steel 1.4104 EN 10088
• Mechanical Seal: Carbon-Ceramic-NBR

MOTOR:

• 3/4 HP
• 115/230V Single Phase
• 60 Hz
• 2-Pole Induction Motor
• Approximately 3450 RPM
• Capacitor Inside Terminal Box
• Insulation Class F
• IP44 Protection