Pearl JCC 10F16P Self-Priming Shallow Well Jet Pump (1 HP, 115/230V, Single Phase, Cast Iron)

The Pearl JCC 10F16P is a 1 HP self-priming shallow well jet pump with a durable cast iron casing, brass impeller, and built-in ejector, paired with a 115/230V single-phase motor. Designed for domestic water supply, shallow well applications, pressure boosting, and garden irrigation, this pump features an exclusive diffuser with flow control device for fast self-priming, low-noise operation, and compact construction.

The JCC series incorporates a robust hydraulic design that helps provide reliable operation even during temporary abnormal operating conditions. Its compact configuration allows for easy installation in restricted spaces and simplifies retrofit applications. The fast air evacuation system reduces the formation of air pockets near the mechanical seal, helping prevent seal failure caused by inadequate flushing and cooling.

The JCC series is capable of lifting water from depths up to 29 feet in less than 3 minutes under specified conditions, making it suitable for demanding shallow well suction lift applications. Its advanced diffuser and flow control device direct water into the central portion of the pump casing, reducing turbulence and flow velocity while minimizing hydraulic noise.

SPECIFICATIONS:

• Manufacturer: Pearl
• Model: JCC 10F16P
• Horsepower: 1 HP
• Voltage: 115/230V
• Phase: Single Phase
• Maximum Amperage: 13.6/7 Amps
• Suction Connection: 1 Inch
• Discharge Connection: 1 Inch
• Weight: 32 lbs
• Pump Type: Self-Priming Shallow Well Jet Pump

FEATURES:

• 1 HP Motor
• 115/230V Single-Phase Operation
• Maximum Motor Amperage of 13.6/7 Amps
• Self-Priming Shallow Well Jet Pump Design
• Cast Iron Pump Casing
• Brass Impeller
• AISI 304 Stainless Steel Casing Cover
• Built-In Ejector
• Exclusive Diffuser with Flow Control Device
• Fast Self-Priming Capability
• Suction Lift Capability Up to 29 Feet Under Specified Conditions
• Low-Noise Operation
• Compact Design for Restricted Spaces
• 1-Inch Suction Connection
• 1-Inch Discharge Connection
• NPT Threaded Connections
• Continuous Duty Motor Design
• Carbon-Ceramic-NBR Mechanical Seal

APPLICATIONS:

• Drawing Water from Wells
• Pumping Water Containing Air or Other Gases
• Increasing Water Pressure from Flooded Suction
• Pressure Boosting for Central Water Systems
• Garden Irrigation
• Water Jet Washing
• Domestic Water Supply

CONSTRUCTION & MATERIALS:

• Pump Casing: Cast Iron GJL 200 EN 1561
• Casing Cover: AISI 304 Stainless Steel
• Impeller: Brass P-Cu Zn 40 Pb 2 UNI 5705
• Wear Ring: AISI 304 Stainless Steel
• Diffuser: PPO-GF20 (Noryl)
• Ejector: PPO-GF20 (Noryl)
• Shaft: Chrome Steel 1.4104 EN 10088
• Mechanical Seal: Carbon-Ceramic-NBR

MOTOR:

• 1 HP
• 115/230V Single Phase
• 60 Hz
• 2-Pole Induction Motor
• Approximately 3450 RPM
• Capacitor Inside Terminal Box
• Insulation Class F
• IP44 Protection