Pearl JCCQ 15C16P Self-Priming Shallow Well Jet Pump with Pressure Switch & Gauge (1.5 HP, 230V, Single Phase)

The Pearl JCCQ 15C16P is a 1.5 HP self-priming shallow well jet pump with a built-in ejector, paired with a 230V single-phase motor. Designed for dependable domestic water supply, shallow well applications, pressure boosting, and garden irrigation, this pump features an exclusive diffuser with flow control device for fast self-priming, compact construction, and low-noise operation.

The JCCQ series features an improved hydraulic design that provides greater reliability and tolerance of temporary abnormal operating conditions. Its compact construction allows installation in restricted spaces and simplifies retrofit applications. Fast air evacuation helps prevent air pockets from developing around the mechanical seal, reducing the risk of seal failure caused by insufficient flushing and cooling.

The JCCQ is capable of lifting water from depths up to 22 feet in less than 3 minutes under specified conditions. Its advanced diffuser and flow control device guide water into the central pump casing, reducing turbulence and velocity while minimizing operating noise. The pump comes assembled with a pressure switch and pressure gauge.

SPECIFICATIONS:

• Manufacturer: Pearl
• Model: JCCQ 15C16P
• Horsepower: 1.5 HP
• Voltage: 230V
• Phase: Single Phase
• Maximum Amperage: 10.6 Amps
• Suction Connection: 1-1/2 Inch
• Discharge Connection: 1 Inch
• Weight: 68 lbs
• Pump Type: Self-Priming Shallow Well Jet Pump
• Included Accessories: Pressure Switch and Pressure Gauge

FEATURES:

• 1.5 HP Motor
• 230V Single-Phase Operation
• Maximum Motor Amperage of 10.6 Amps
• Self-Priming Shallow Well Jet Pump Design
• Built-In Ejector
• Exclusive Diffuser with Flow Control Device
• Fast Self-Priming Capability
• Suction Lift Capability Up to 22 Feet
• Low-Noise Operation
• Compact Design for Restricted Spaces
• 1-1/2-Inch Suction Connection
• 1-Inch Discharge Connection
• NPT Threaded Connections
• Integrated Pressure Switch
• Integrated Pressure Gauge
• Continuous Duty Operation
• 140 PSI Maximum Pump Casing Pressure

APPLICATIONS:

• Drawing Water from Wells
• Pumping Water Containing Air or Other Gases
• Increasing Water Pressure from Flooded Suction
• Pressure Boosting for Water Systems with Low Pressure
• Garden Irrigation
• Water Jet Washing
• Domestic Water Supply

OPERATING CONDITIONS:

• Liquid Temperature: 32°F to 95°F
• Maximum Ambient Temperature: 104°F
• Maximum Suction Lift: 22 Feet
• Maximum Permissible Pump Casing Pressure: 140 PSI
• Continuous Duty Operation

CONSTRUCTION:

• Close-Coupled Self-Priming Shallow Well Jet Pump
• Built-In Ejector
• NPT Threaded Suction and Discharge Connections
• Exclusive Diffuser with Flow Control Device

MOTOR:

• 1.5 HP
• 230V Single Phase
• 60 Hz
• 2-Pole Induction Motor
• Approximately 3450 RPM
• Capacitor Inside Terminal Box
• Insulation Class F
• IP44 Protection