1 1

Sta-Rite

Sta-Rite HP7E-02 HP Series Signature 2000 Cast Iron High-Pressure Booster Pump (1 HP, Single Phase, 115/230V, ODP, 7 GPM)

Sta-Rite HP7E-02 HP Series Signature 2000 Cast Iron High-Pressure Booster Pump (1 HP, Single Phase, 115/230V, ODP, 7 GPM)

$1,522.00 USD
$2,998.00 USD $1,522.00 USD
Sale Sold out
Shipping calculated at checkout.

HP7E-02

The Sta-Rite HP7E-02 HP Series Signature 2000 Cast Iron High-Pressure Booster Pump is built with a SignaSeal floating impeller minimizing thrust loads allowing continuous trouble-free operation. A 7 GPM pump with strong 1 HP motor make it suitable for many different users. Designed and engineered by Pentair Sta-Rite - a brand you know and trust. Contact a Dade Pump customer service representative with any questions or for help selecting the correct pump for your needs.

Specifications:

Suction & Discharge Casting:  Cast Iron

Pump Shell:  304 Stainless Steel

Shaft Seal:  Carbon Ceramic, Buna-N

O-Rings:  Buna-N

Voltage:  115/230V

Motor:  1 HP, Single Phase, ODP

Stages:  16

Impeller Material:  Acetal

Ports:  3/4" NPT 

Duty Cycle:  Continuous

Frequency:  60 Hz

Manufacturer Description:

The HP/HPS Booster Pumps are the most durable booster pump available. The proven SignaSeal floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings, mechanical seal or pump hydraulic components.

Applications:

  • Car Wash
  • Filtration and reverse osmosis
  • Residential, commercial or agricultural pressure washing
  • Booster and spray systems
  • HVAC
  • General Purpose Pumping

Series Specifications:

  • Max. Inlet Pressure: 80 PSI
  • Max. Working Pressure: 315 PSI
  • Max. Suction Lift: 15 feet
  • Maximum Limits: Prolonged use with liquids above 140°F is not recommended.
  • Discharge:
    • HP Series: cast iron
    • HPS Series: stainless steel Motor
  • Adapter and Base:
    • HP Series: cast iron
    • HPS Series: stainless steel
  • Shell: Stainless steel 304 grade
  • Impeller: Acetal
  • Diffuser: Polycarbonate
  • Shaft: Stainless steel 304 grade
  • O-Rings: Buna-N
  • Mechanical Seal: Carbon/ceramic, Buna-N

Series Features:

  • SignaSeal Staging System: The proven SignaSeal staging system utilizes a ceramic wear surface that, when incorporated with Sta-Rite’s “true” independent floating impellers, dominates with 1st-in-class performance, superior sand handling and thrust management staging system.
  • Acetal Impellers: Precision-molded for perfect balance…ultra-smooth for highest performance and efficiency.
  • Precision-Molded Diffusers: Superior performance with high resistance to corrosion and abrasion.
  • Mechanical Shaft Seal: Precision lapped and highly polished carbon-ceramic, stainless steel construction. Internal design guarantees continuous water lubrication.
  • Motor Windings: Superior insulation materials protect against excessive moisture and contaminants…assure prolonged motor life.
  • Balanced Rotor: Diecast under high pressures for uniform performance and greater efficiency; dynamically balanced.
  • Heavy-Duty Ball Bearings: Shielded, permanently lubricated bearings, extensively tested to ensure extended life and smooth, quiet operation.
  • Pump and Motor Shaft: Stainless steel for maximum corrosion resistance; one-piece threaded shaft for positive impeller drive.
  • Dustproof Cover: All electrical components are protected from dirt, dust and insects by a dustproof canopy; ventilating air cannot contaminate.
  • TEFC Models available. Contact Customer Service.
View full details